LumberJocks

Woodworking blog entries tagged with 'square tenon'

  • Advertise with us
View ruddhess's profile

Japanese Carpentry Tool Box 第 #1: Number 2 - second toolbox.

04-19-2015 09:09 PM by ruddhess | 0 comments »

I enjoyed making the first one so much, here goes number 2. I decided to leave the drywall screws in the batten boards on the top of the first box. I like the way they look, and I like the way they grip/hold stuff down. I’ve been using drywall screws to put stuff together for since forever. I think they look fine. Kind of utilitarian. That fits my style well. So I am going to use 1-1/4” DW screws for the flat joins and 2-1/2” DW screws for the perpendicular joins (bugle head...

Read this entry »


View ruddhess's profile

Japanese Tool Box #7: Filling In Some Cracks - Oops!

04-17-2015 02:17 AM by ruddhess | 5 comments »

First off, I should have used epoxy. Secondly, my experiment with coloring yellow glue went awry. Well, somewhat anyway. I found a way to make a nice dark brown color (could be used successfully on some dark walnut). I just got into the cupboard and found some cheap food coloring like they sell to color easter eggs. I added a bunch of red first, and that came out sort of magenta looking, so I added a little bit of each of the other colors: yellow, green, blue. Mixed it with regular Elmer̵...

Read this entry »


View ruddhess's profile

Japanese Tool Box #2: Finishing Cutting Mortises

04-08-2015 05:15 AM by ruddhess | 2 comments »

At this point I am cutting the mortises from both sides with hammer & chisel – not using the 3/4” forstner bit. This is the first one. Two done, six to go. Pictures: One thing I discovered during this experiment: the mortises on the first board that I cut using the 3/4” forstner bit were a tighter fit for some reason. The second board mortises were all done with hammer & chisel and came out a bit oversized ...

Read this entry »


View ruddhess's profile

Japanese Tool Box #1: Cutting Sides & Square Tenons

04-05-2015 01:23 PM by ruddhess | 2 comments »

I actually broke down and sharpened the blade on one of my crappy (not the crappiest, next one up) little block planes. Made some shavings. Not exactly the right tool for the job and the blade wasn’t dull anymore, just not as sharp as it needed to be. Resorted to a bit of hand sanding with a block and some 120 grit. Inching my way toward ‘real’ woodworking! I am going to do some square mortise/tenon joints for the ends of the box. This time, I am doing it “rightR...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com