Woodworking blog entries tagged with 'spear jackson'

  • Advertise with us
View Brit's profile

Saw Talk #22: Combination Saw Tooth Geometries Compared

08-12-2012 09:14 PM by Brit | 27 comments »

In my last post I said I would re-sharpen the Drabble and Sanderson to try Mark Harrell’s hybrid sharpening, but I decided to leave that one with 10 degrees of rake and 10 degrees of fleam. Instead, I re-toothed my 12” Spear and Jackson Leap Frog carcass saw from 10 tpi to 12tpi and applied Mark’s hybrid filing to that. I figured it would be good to have a 12” carcass saw with a combination filing as well as a 14” sash saw. Mark also recommends 10 degrees of rake, but he relaxes th...

Read this entry »

View Johnnyblot's profile

Saw Points #5: The 10" Spear & Jackson Brass Backed Tenon Saw.

08-10-2012 05:01 PM by Johnnyblot | 7 comments »

After quite a long break I finally got around to finishing off this little S&J saw.Professionally resharpened to 13ppi Cross cut. Before: - The tote was re-modelled -not much- to give it a more traditional ‘Lambs Tongue’ After: - They are nice little saws these Spear & Jacksons. :-) CheersJohn.

Read this entry »

View Johnnyblot's profile

Saw Points #4: The Non Break Handle- a tale of two Spear & Jackson saws

03-30-2012 10:22 PM by Johnnyblot | 4 comments »

The latest ‘messing about’ in the workshop has been on two handles for two Spear & Jackson saws. The first saw handle to be ‘re-modelled’ belongs to the 10” S&J Brass Backed Tenon saw I mentioned in the previous blog entry, [mistakenly as a 12”] and my 8” ‘Steel Backed’ S&J Dovetail saw, 20ppi. The 8” Dovetail handle has 3 saw nuts, but only on the left hand side. The third screws into the steel back! Both sa...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics