LumberJocks

Woodworking blog entries tagged with 'slide'

  • Advertise with us
View thiswoodshop's profile

Squaring my miter saw

12-11-2011 06:19 AM by thiswoodshop | 2 comments »

I had a Ryobi 14 Amp 10 in. Compound Mitre Saw. It was working fine but could only cut a max of 5 inches wide boards. I was in the market for a new on but all of the sliding miter saw was so costly. I even considered a Harbor Freight one, but even at that it was a $100 and more for one. I decided to check out craigslist.com and found a Kobalt one there for s feel. Well, after I got home I found out why it was so cheap – it was not square. I tried a couple of time to square it up but it...

Read this entry »


View PurpLev's profile

Machinist Toolcart #10: Drawers Part III: Decisions and Actions

08-27-2011 10:35 PM by PurpLev | 4 comments »

I was holding off on the last (lower and larger) drawers due to lack of material which in essence was a good thing as It made me rethink those drawer dimensions and ended up with what I believe is a better build, but more about that later. What was the issue? The lower 3 drawers are the largest/tallest at 6”, 5”, and 5”, but I only had enough materials for 3 ~2.5” tall drawers + some additional material but not enough to glue material together to give me 6”...

Read this entry »


View RonPeters's profile

Splines vs Biscuit Joiner #6: Quick drawer question for the more experienced!

08-29-2010 03:07 AM by RonPeters | 3 comments »

Ok, so I’ve changed the design of the drawers a bit on my bench cabinet. I decided that instead of sliding on wood rails – per the plan – that it would be much better to use side mount ball bearing sliders. The plan calls for 19-3/4” deep (carcass is 20” deep) but they don’t make 19” sliders. I got 18”s. The width of the drawer is 23” (I know, I’ve read that they shouldn’t be wider than the slider, oh well…) Depth o...

Read this entry »


View Chris Davis's profile

Daily Update #14: December 11, 2009

12-11-2009 02:52 PM by Chris Davis | 0 comments »

What’s happening in the shop for December 11, 20009 . I’ll be working on a loft bed with a slide. Trying to get it out for tomorrow. For missed video and building pictures see my Current Projects link at wwbeds.com or poggyskids.com. Watch us live:<div></div>

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com