LumberJocks

Woodworking blog entries tagged with 'skirt'

  • Advertise with us
View PurpLev's profile

Bowling Alley Workbench #13: The Top #3: Putting it Together with an Inverted Dovetail

08-02-2009 10:56 PM by PurpLev | 14 comments »

Didn’t have much shoptime lately, which made me try to squeeze every moment I got to try and make the most of it, which lead to rushing, which lead to screw up – but I’ll write more about that in a following installment and leave this one a bit more on the positive side. Last time I ran into the issue of having a not-square top part to work with. I fixed that by routing the edge at a 0.1 degree angle to straighten the front of the slab and make it parallel to the front 2 ...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #12: All is not lost... or is it? HELP!!!!!!!

07-29-2009 04:15 PM by PurpLev | 21 comments »

I was working on fitting the skirt to the front of the bench, and it looks fantastic. in order to get to the final dimensions of 30” width of the top, I’m missing 1/8” extra material between the benchtop and the skirt to fill in the gap, while keeping the skirt flush with the legs fronts. so far so good. while fitting the skirt to the legs, I noticed that the gap on the left side of the bench is larger than the right side… a quick reach to the tape measure confirmed...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com