LumberJocks

Woodworking blog entries tagged with 'shaping'

  • Advertise with us
View Karson's profile

Hall table #2: Finishing up the Thorsen Hall table

12-18-2007 05:27 AM by Karson | 22 comments »

The continuation of my Thorsen Hall table. The beginning is here My wife is happy with what is happening so far. I suggested that I try the other Greene and Greene feature that is the breadboard spline a key between the top and the breadboard end. I used a book that I bought on Greene and Greene furniture. The book is called Greene and Greene Design Elements for the Workshop by Darrell Peart published by Linden Publishing 2005. I got a piece of Blackwood 1 ¼” square and 5” long. ...

Read this entry »


View miles125's profile

Shaping a handrail transition

12-17-2007 12:57 AM by miles125 | 5 comments »

This is my attempt to show you how i made the handrail transition i listed in my projects page. What i started out with was a full size drawing of the handrail profile. I then decided i was going to do the rough hogging out of material by using a core box bit in my formica router. So if you look at the drawing you can see how i drew in the actual router bit size and its depth location to tell me how far from the edge of the rail to go, and how deep to go. I then fashioned a fence to ...

Read this entry »


View Karson's profile

Hall table #1: A Hall table for my wife - Thorsen Variety

12-16-2007 06:25 AM by Karson | 20 comments »

My wife was starting to get ready for some Christmas decorations. She notified me that she’d like a Sofa table to place against the wall in the kitchen to put decorations on. She also stated a requirement that it be like the Thorsen table that was built by my son Dave. for the Thorsen Table Challenge that we had earlier here on LumberJocks.com . His table has aged some since Dave made it and it now sits in the kitchen where my wife puts her purse when she comes into the house. It’s wh...

Read this entry »


View Mark Mazzo's profile

The Craftsman's Path #19: Queen Anne Side Table - Turning and shaping the feet

12-04-2007 06:47 PM by Mark Mazzo | 3 comments »

After band sawing the legs to rough shape in my last post, the next steps in developing the legs were to turn and shape the feet and to smooth and mark them for final shaping. This was an interesting process. There’s a good description and lots of pictures in the latest post on my blog. Let me know what you think – thanks for reading!

Read this entry »


« prev 1 ... 82 83 84 85
844 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com