LumberJocks

Woodworking blog entries tagged with 'segmented'

  • Advertise with us
View lew's profile

Kitchen Utensil Holder

02-16-2014 05:14 PM by lew | 17 comments »

Some time back, I made a small, box shaped holder for some of Mimi’s kitchen utensils. Everyone has a few things that won’t fit into the drawer or hang on the wall. Over time, it apparently shrunk- I guess the wood dried out- because nothing seemed to fit. I wanted to try doing another segmented turning, so this project was born. Cap’n Eddie has a video on making a dedicated jig for cutting segments. Using his ideas and borrowing a few from Frank Howarth’s miter ...

Read this entry »


View Woodhacker's profile

Segmented Bowl - 1st try

04-26-2009 02:33 AM by Woodhacker | 16 comments »

Until recently my lathe experience has been 50 or so pen/pencils, a few miniature goblets, and a couple small 5 inch bowls over the past few years on a Jet mini lathe, enough to want to try other lathe work. This past fall I was fortunate to have the opportunity to acquire a PM 3520B, but due to other work and priorities I’ve not had a lot of time to use it yet…and that’s “killing me”. So this blog documents what I consider my first significant lathe project. Recently a partially segmen...

Read this entry »


View dspahn's profile

Segmented Fail (?) -- 20% rant, 80% cry for help

11-26-2011 09:22 AM by dspahn | 14 comments »

So after watching some videos on segmented bowl construction and turning, I decided to give it a shot while I wait for my cole jaws to arrive in the mail. I actually went to a lumber place and bought a few pieces: some walnut, alder, cherry, and something with the word “african” in it… maybe mahogany, but I’m not 100% sure. And then, after I got home, whinging internally about spending $40 on an amount of wood you could maybe build a desk for a barbie doll out of, ...

Read this entry »


View darryl's profile

Trying Something New

11-29-2009 06:37 AM by darryl | 12 comments »

In taking a break from the wine bottle stoppers I’ve been making, I wanted to make something that I haven’t done yet. I’ve always been very impressed with the vessels that trifern has posted, so I thought I would start there. Now don’t go thinking that just because it’s not a wine bottle stopper that I’ll be turning a single piece of wood. Heck no, a segmenting we will go! This piece is 6” tall and about 3-3/4” in diameter at its wides...

Read this entry »


View darryl's profile

Segmented Christmas Tree Ornament

12-12-2009 07:04 PM by darryl | 11 comments »

After completing the Segmented Vessel, I decided I’d make the segments on my next piece a little thinner than the 3/4” previously used. Since we are all in the Christmas spirit, I thought I’d make a new ornament for our tree this year. The segments in this piece are 1/4” thick, and this piece includes a total of 92 segments. Here’s the before picture of the ornament blank glued up on the lathe. After turning, sanding and the first coat of wipeon polyurethan...

Read this entry »


View Grumpy's profile

How To Make Segmented Lidded Boxes Using Milk Container Tops.

12-19-2011 10:35 AM by Grumpy | 10 comments »

I recently posted a project called “Milk Bottle Tops & Scrap Wood”, http://lumberjocks.com/projects/57351 There was some interest in the concept & some of you requested a blog on how they were done.So I thought I should get on with it before I forgot the whole process. LOLThe whole idea started from a need to cut down on all the scrap pieces of wood and composite material lying around in the shed.We all have those bits that we won’t throw out. They will come in ha...

Read this entry »


View poopiekat's profile

Segmented Woodturning: "to boldly go...."

03-24-2011 05:55 PM by poopiekat | 9 comments »

I have been studying segmented turning for a while. I have lots of small pieces of exotic lumber, a really good lathe, and seeking some out-of-the-ordinary projects less frequently seen. It was some You-Tube videos, a 90 yr old turner in North Carolina, who really made me conclude that this was something I could be doing! And so it began, two blocks of 10/4 maple, with a purpleheart filler. Next, some laminated beech, cherry and maple, and a pedestal made of salvaged yew from a neighbors t...

Read this entry »


View poospleasures's profile

Segmented bowl base ring cracks??

03-10-2014 01:46 PM by poospleasures | 7 comments »

I ask for your comments and suggestions about a opportunity (problem) with a couple similar bowls. Both made from walnut and maple. One about 11 1/2” other 13”. History—have been doing segmented bowls for just over a year with this cracking only on these two. I hope you can see the two joints with the yellow circles. Those joints separated by appx. .0003th of an inch. If held up to a light you could see through. These were made the same way as almost all the bowls I’ve...

Read this entry »


View OSU55's profile

Turning #1: Segmented Bowl Process

04-07-2015 09:38 PM by OSU55 | 7 comments »

This tutorial is about the process I use to create a segmented bowl, or about any segmented turning item. After researching many methods and trying many of them, I’ve been able to put together a fairly simple and robust process that uses as few specialty tools or jigs as I could. Where possible I used existing jigs and tools that I already had and others may also have. #1 – Design Once you have the approximate size, shape, and feature designs of the end item to build, the number of ring...

Read this entry »


View Grumpy's profile

Segmented Table With a Difference

12-12-2016 10:40 PM by Grumpy | 7 comments »

This is not exactly my cup of tea but his methodology is definitely inspiring(Special thanks for Candy for showing me how to post an embedded youtube video).View on YouTube

Read this entry »


1 2 3 next »
21 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com