LumberJocks

Woodworking blog entries tagged with 'scratch build'

  • Advertise with us
View htl's profile

Toy Construction #183: Front and back suspension that works

02-12-2018 11:57 PM by htl | 18 comments »

Front and back suspension that works on the Mack dump truck.Rain rain go away so I’ll stop hurting but didn’t let the work stop. Up and Down Now for the front Up and down with the front end.

Read this entry »


View htl's profile

Toy Construction #181: Mack truck Dump box 2

02-08-2018 12:31 AM by htl | 14 comments »

Took longer to get the dump box under control than I would have figured.. There’s just something about the shape of this dump box, love the look of it and have wanted to build it for a long time.

Read this entry »


View htl's profile

Toy Construction #242: Chevy Corvette 1953 Making what's wrong right

11-08-2018 10:33 PM by htl | 12 comments »

I guess I’m not much of a modern car builder, give me square parts and all is well. lol Here’s the bad part and then the fix. There’s a lot a work that went on between these two pictures. Now we got her back to right.I know this isn’t true Vette styling but it is what it is.I am having a hard time coming up with a seat that works so will be playing with the wheels and sleep on the seat thing.

Read this entry »


View crowie's profile

Hot Rod FORDS #3: And we have wheels

02-04-2018 10:26 AM by crowie | 12 comments »

And we have wheels… 2.75” dia a 1” for the front three segments with 20 tread cuts at 5deg 3.5” dia x 2” for the rear.. five segments with 20 tread cuts at 5deg

Read this entry »


View htl's profile

Toy Construction #186: Just about there with the Mack.

02-22-2018 01:01 AM by htl | 11 comments »

If I add front wheel drive does that make this a 6 wheeler or a ten? The drive shaft follows the Differential on both the front and back. As I said just about there. Here's the finished project.

Read this entry »


View htl's profile

32 Ford working on the spoke wheels

07-26-2019 11:08 PM by htl | 11 comments »

Before I glue up the wheel wells I figured it would be a good idea to have the wheels so every thing lines up just right, so it’s wheel making time again. Here is where I got all my info for making spoke wheels, I do it a little different but this will give you all the info needed, I watched it 10 or more times before it all started to come together. There’s a hundred ways to do any thing but here’s what’s working for me right now for building spoke wheels. Dr...

Read this entry »


View htl's profile

Toy Construction #267: Scratch build Steam Train

08-23-2019 11:07 PM by htl | 10 comments »

This will be a scratch built Steam train in the style of the 1860’s or there about.Something like this. Here’s where I got to today.I have three partial days in it, one of those spit and sputter builds. I have the plans for both Toys and Joys trains but wanted it to have a longer look to the boiler.I have built both the wood and coal T&J’s Trains.Started with the frame.The back is 3/4” and went back and thinned the front part down to 1/2”, I used dowels...

Read this entry »


View crowie's profile

Hot Rod FORDS #11: Nearly Finished

02-17-2018 07:56 AM by crowie | 10 comments »

Nearly Finished!! The body and back are glued to the chassis. The radiator is glued in plus added stays. No windscreen/windshield as I’m sure it wouldn’t last the little boys play tests. The rear bumper bar is done, BUT I’m keep that surprize for until the final revival. So all the needs doing is the seats glued in place, the wheels glued into the chassis plus a little detailing before 3-4 coats of satin polyurethane clear…..

Read this entry »


View crowie's profile

1933 Ford Fordor Sedan #6: Windscreen, dashboard and seats

10-18-2019 06:56 AM by crowie | 9 comments »

The windscreen was done twice as the first one done in Jarrah snapped so the second is American Walnut. The dashboard is also American Walnut on a firewall of Gidgee. The dash needs a steering wheel which will be made using a Dutch wooden button plus a glove box and gear shift level to be completed. The seats are Australian Red Cedar which I had to made twice also thanks to mis-measurements. They will have a small plinth underneath them to raise them which will make the position...

Read this entry »


View htl's profile

Toy Construction #268: Scratch build Steam Train wheels

08-27-2019 07:23 PM by htl | 8 comments »

Got a little more done. Found out my tread making jig also does a pretty good job at making spoke wheels, sure saves a lot a time I would have to be drawing all the points needed to drill. Just add a blank and drill, once the jig is centered to the bit. The indexer is set up for cutting 36 treads but as you can see I have it marked for every other hole or as I did this time every third hole. As you can see the backer plate gets pretty chewed up when making the different sizes...

Read this entry »


1 2 3 next »
27 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com