LumberJocks

Woodworking blog entries tagged with 'saw till'

  • Advertise with us
View CartersWhittling's profile

Tool Chest #8: Tills and Tool Storage

08-15-2012 04:01 AM by CartersWhittling | 18 comments »

Hello. When I left off the chest was built and ready for the tool storage inside. After giving tool storage some thought I decided on having 3 sliding tills, rear moulding plane storage, front saw till, and tool rolls hanging on the front wall. Nothing really new, but I think my tool roll idea is. When trying to come up with ways to store drill bits and/or chisels on the front wall of my chest I came up with an idea involving canvas tool rolls. What I have is nails driving into t...

Read this entry »


View Brandon's profile

Dutch Tool Chest #5: The Larger Saws

04-15-2013 02:03 PM by Brandon | 19 comments »

My goal on the Dutch tool chest was to incorporate a space for two larger saws in the design. Like Chris Schwarz’s Dutch tool chests, I was determined to locate the saws on the lid, yet what I didn’t like about his design was that it required ample space on both sides of the tool chest to pull the saws out. I usually don’t have much space on either side. Here’s his design (and notice that you can’t pull that bottom saw out without running it into that workbench o...

Read this entry »


View jjw5858's profile

Exercises in Artisanship #8: Creating a sawtill with what ya got! PART 1

05-02-2012 09:45 PM by jjw5858 | 6 comments »

This series of Exercises in Artisanship is all about making the best with what you have. With a small budget and the challenges of some lower grade box store pine I hope you will join me for the twists…...the cups…..the thrills…..the curse words…..lmao. Somewhere Charles Neil is going…....told ya!......lol No really friends all jokes aside….it’s sometimes fun to learn to make do with what we have and try to make lemons from lemonade. In this ...

Read this entry »


View RaggedKerf's profile

Saw till

12-15-2012 09:00 PM by RaggedKerf | 2 comments »

I decided to burn through some more of my scrap wood, this time stuff left over from when I built the miter saw/router table station. There was some pretty good sized 1/2” plywood left over cut at odd angles (which was itself scrap from our shelving project). I have been mulling over what to do with this odd sized (about 2’ x 4’) wood and finally hit on an idea: a saw till. For a while now, my master plan has been to get the tools that I use regularly (that is, the h...

Read this entry »


View bearkatwood's profile

Shop Remodel #8: It's Monday, Back to the Ole Grind.

12-01-2015 12:41 AM by bearkatwood | 14 comments »

It’s Monday and it’s back to the ole grind I go. This is another blog in my ongoing series to remodel my shop and make a saw till, drill press cabinet, tool cabinet, plane till and workbench. I have been woodworking for 16+ years and have always done my work in dark, dusty caves on anything that would resemble a bench. I have finally decided to spoil myself and go hog wild doing it. I wanted to bring you all along as I made these pieces as it will be a very epic build. I have ...

Read this entry »


View WoodAndShop's profile

How to Make a Woodworking Hand Tool Storage Board

06-02-2014 07:36 PM by WoodAndShop | 0 comments »

By Joshua Farnsworth (Writer at WoodAndShop.com) In my above video I show the woodworking “hand tool storage board” & shelf that I just designed and built to store & display some of my most used hand tools, including my chisels, marking gauges, back saws, try squares, dividers, and molding planes. In addition to using scrap to build this simple storage board (which hangs on wall studs) I built a shelf for my molding planes using simple 2×10 pine boards. The mo...

Read this entry »


View jjw5858's profile

Exercises in Artisanship #9: Creating a saw till with what ya got! PART 2

05-05-2012 09:42 PM by jjw5858 | 5 comments »

Hey friends, hope this weekend is being enjoyed by everyone. Moving on through this project with some learning and shavings I have another installment of where I am on the map with this saw till. I have watched and kept aware of this cheaper pines cupping and twisting as best as possible. I really wanted this thickness to remain on the boards so I sacrificed planing down in the various directions and trueing it down to smaller than desired width. I actually did at first give it a few sweep...

Read this entry »


View builtinbkyn's profile

New Shop in the Raw #9: Hand Tool Storage/Sharpening Station

03-06-2016 10:02 PM by builtinbkyn | 23 comments »

With the workbench complete, it’s time to make some kind of storage system for the hand tools I’ll be using on the bench. I’ve amassed a small collection of older Stanley planes, a couple of LN block planes, a few chisels of different varieties and various other tools that I’d like to have readily accessible from the bench. I’ve chosen to make a stand that will sit next to the bench. The design is still not solidified, but I did start on the section dedicated ...

Read this entry »


View jjw5858's profile

Exercises in Artisanship #10: Creating a saw till with what ya got! PART 3

05-10-2012 10:27 PM by jjw5858 | 12 comments »

Hi friends here we are again back in the shop and making and marking up the next to do’s for this saw till project I have been working on. This project is just what is needed for my fast growing collection of handsaws as you will see…..lol. This is a piece that has brought some more expansion in the learning of joinery, and getting a chance to exercise some new lessons learned. Pic 1-2: I needed to make a pair 1×2 mortice’s on each side for my rail to joint into t...

Read this entry »


View HappyHowie's profile

Saw Till #1: Saw Till for My Pegboard Wall

08-18-2016 08:31 PM by HappyHowie | 5 comments »

With a reader’s tip for a Woodsmith magazine issue, I made myself a simple saw till. I mounted the till on my pegboard wall. This way my hand saws, including my Wood River dovetail and cross-cut hand saws, have easy access in my woodshop. I noticed I could also place here several of my combination squares.

Read this entry »


1 2 next »
18 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com