Woodworking blog entries tagged with 'router bits'

  • Advertise with us
View Keith Kelly's profile

Wicked Fast Router Bit Organizer Trays - using dadoes instead of holes

04-04-2019 05:24 AM by Keith Kelly | 4 comments »

I feel some sort of closeness with you guys that I don’t feel with the rest of the internet. Therefore, I’ll tell you the strange things that were going through my mind as I worked through this problem: I wanted all my router & Dremel bits close together, but I did not want to drill all the holes. So I waited. Experimented. Failed. — One day, I decided to pretend, in order to identify presumptions. I pretended that the router bit wasn’t a route...

Read this entry »

View kenthemadcarpenter's profile

the never ending organinzing and improvements #1: Making things that work for you.

10-12-2015 11:39 AM by kenthemadcarpenter | 0 comments »

So I just got done building my first router table, by cannibalizing an old work bench I had built a few years ago, and stealing the plate from my other router table, my problem due to my limited and crowded work space, is keeping things with in reach, I have four router bits that I use religiously so having them with right there with in reach is more convenient for me, so i came up with the fence storage on the back side of the fence, this way here, I can keep my router bits with in r...

Read this entry »

View Angela's profile

TV Stand #8: Raised Panel Doors, Soss Invisible Hinges, Table Top Edge, Getting Ready for the Finish

10-17-2011 03:14 AM by Angela | 2 comments »

Yes it’s been over a month since I’ve posted an update but I’m still working on my TV stand. Raised Panel Doors Since my last blog, I finished the raised panel portion of my doors. This is the first time I’m doing a raised panel and I was having a problem getting the panel flush with the frame. To correct this problem I disassembled the panel router bit and raised the back cutter. Now I would be able to remove more of the back. Now the panel fit exactl...

Read this entry »

View Angela's profile

TV Stand #7: Cauls, jigs, molding and doors

09-15-2011 05:20 AM by Angela | 4 comments »

Bottom MoldingI cut a long piece of the African mahogany 3” wide. I original use ¾” but didn’t like the way it looked so I planed it down to 5/8”. I ran it through my router table using a Freud Roman Ogee router bit # 38362. I first cut the front piece. I used the same angles that I used on the main case. After cutting the side angles, the pieces didn’t fit based on the angles I cut them. When I glued the sides of the main case together the angles came out different from wha...

Read this entry »

View Karson's profile

It Works. I can attest to it. Cleaning saw blades, router bits, files and sanding belts.

08-05-2010 02:03 AM by Karson | 20 comments »

Yesterday, I posted a blog on a failure Today I thought I post a blog on a success. I’ve used this product before on cleaning saw blades. Yesterday I was walking around a Black & Decker outlet store in Delaware and I ran across these brass brushes 3 for $1.00 so I picked up three. When I got to the checkout the guy asked if I would want another 6 for another $1.00 so I bought those. I thought I’d use them for cleaning out my files and then later I thought about cl...

Read this entry »

View RouterManiac's profile

I saw a contest #1: 50 Piece Router Bit Giveaway Drawing

11-01-2009 01:34 AM by RouterManiac | 6 comments »

I found this giveaway and thought I would pass it along. Its a drawing for a free router bit set with cabinet. I can always use more router bits and I am sure you can too. The odds have to be better than the lottery for winning. You could give it as a nice gift or keep it for yourself. Wouldn’t you know it, I bought this set about a year ago and now they are giving one away! 50 Piece router bit set

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics