LumberJocks

Woodworking blog entries tagged with 'roughing gouge'

  • Advertise with us
View Dave Polaschek's profile

Little Staked Table #4: Turning the Legs (#0 ?)

10-06-2021 07:46 PM by Dave Polaschek | 11 comments »

I turned another set of legs this morning, and figured I would take pictures and describe the process. With the square stock (5/4 square), turn it between centers to get a round tenon about 1.2” diameter on one end so I can put that in my chuck. I use a spindle gouge for that, since all I need to do it get things round and then a little more wood off. This is done with my lathe at a fairly slow speed. About 3 on the speed selector (out of 10). I do this for all four legs, as I’m...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com