LumberJocks

Woodworking blog entries tagged with 'rough sawn'

  • Advertise with us
View LastingBuild's profile

How to dimension lumber with handtools #4: Parallel face and edge

09-15-2018 12:20 AM by LastingBuild | 0 comments »

After establishing the reference face and edge, I use my marking gauge to mark the board thickness using the reference face as the guide. Once I have marked all four sides, I use my jack plane, jointer plane and smoothing plane to bring down the rough surface of the board to my marking lines. Then, I repeat the step for the board width using the reference edge as the guide. Once finished the board was perfectly square. (as perfect as necessary at least). If you would like to watch my video...

Read this entry »


View PoohBaah's profile

Timber Frame Barn Remodel #1: Barn Workshop The Beginnings

09-05-2017 04:27 PM by PoohBaah | 8 comments »

Three years ago my wife and I were gifted an acre of land to build a home upon. Included in this acre was this barn. It is a good sized barn at 40’ x 50’ with a hay loft upstairs that is massive and it already has a concrete floor on most of it. Now it has been a hot topic with in the family of what we should do with this barn. My wife’s grandmother hates it for one reason or another and feels it needs torn down. I on the other hand see all the potential within and ju...

Read this entry »


View jasonallen's profile

Like opening a Christmas present

12-19-2013 05:13 AM by jasonallen | 2 comments »

Awhile back i cut down some oak trees for a friend. I took the firewood for myself and we loaded up the trunks on a 2 ton truck and hauled them to a mill for his personal use. When I recently started my own little woodshop he gave me some of that lumber to get started with. Since we are all natural born tightwads around here he gave me the worst bottom of the barrel lumber out of the whole bunch. But I’m not complaining about free material. Today I decided to see what I could get o...

Read this entry »


View turkva's profile

Flag Display And Shadowbox #1: Day 1

03-30-2009 03:14 PM by turkva | 1 comment »

OK, so I decided to go with the Flag Display case. Shouldn’t take too long, and I really want to protect the flag and memorabilia. I started out with two rough sawn red oak boards that were in pretty bad shape. You can see in the picture that about 1/3 of the boards are splintered pretty bad. I figured that since the parts for this project are pretty small, I could manage to get enough straight grain out of these two boards and save some of the better lumber for other projects. Roug...

Read this entry »


View woodchips's profile

Calling All Texas Lumberjocks...

01-09-2009 01:06 AM by woodchips | 5 comments »

Hey Guys, I told a friend I’d try and sell some of his black walnut so here’s the offer. I’m trying to put together a package deal since he wants to sell all 7000 bf of it in one fell swoop, of course it doesn’t have to be all one buyer. Anyway the wood is all air dried, all 10/4 and 5/4 stuff, some of it is up to 12” in width and none of it is less than 6’ long with most of it 8’ up to 12’ in length. I know lots of ya’ll might not b...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com