LumberJocks

Woodworking blog entries tagged with 'rockwell'

  • Advertise with us
View Mark Duncan's profile

Delta Rockwell Super 900 Radial Arm Saw #2: 1958 or 59 Delta Rockwell Super 900

08-05-2009 10:44 AM by Mark Duncan | 17 comments »

These are the pictures after I completely took this saw apart, lubed it, removed the majority of the rust, repainted, and reassembled. All i have to do now is to finish hooking up the switch and this saw will be ready for a top.

Read this entry »


View Tyrone D's profile

Rockwell/Delta Homecraft 10" Bandsaw Restoration #1: The Beginning

03-27-2012 12:00 PM by Tyrone D | 12 comments »

Hello,I found the best find ever in my life. I found a Delta Homecraft 10” Bandsaw in an alleyway cast away near a “free” sign. I thought to myself, “That bandsaw deserves better and I took it home.There she is in her miskept beauty. On of the things that really pecks my brain is the stand. It says, “Property of CC Wakefield & Co. Ltd.” on it. Charles Cheers Wakefield is the founder of C.C.Wakefield & Co(Now known as Castrol). What’s weird is ...

Read this entry »


View cranesgonewild's profile

Unisaw 34-450 for $300

05-27-2011 01:39 AM by cranesgonewild | 19 comments »

Yup, you read that correctly.I’ve been on a search for a while now trying to find a half decent table or cabinet saw. I’ve jumped back and forth from used on Kijiji to a new Ridgid 4512, back to used, then I was going to buy a new Grizzly G0690, right up until Monday. That’s when I got the call. My brother in law sent me a link Monday morning to a Rockwell/Delta Unisaw 34-450 on Kijiji that was posted late the night before. It was a really nice looking saw with no damage ...

Read this entry »


View Mark Duncan's profile

Rockwell Saw - Jointer Combination #2: 1970's Rockwell Table Saw Jointer Combination

08-05-2009 10:21 AM by Mark Duncan | 1 comment »

These are pictures after I finished the top, realigned and repainted the fence, and used it for a bit.

Read this entry »


View Mark Duncan's profile

Rockwell Saw - Jointer Combination #1: 1970's Rockwell Table Saw Jointer Combination

07-30-2009 11:53 AM by Mark Duncan | 3 comments »

My dad bought this saw for $100 after we saw the ad on Craigslist.Since then i have had to adjust the fence, lube it, and put a new blade in it and it sounds like brand new.I cleaned the table off by using a wire brush for my drill and sanded the top with wet/dry sandpaper soaked in mineral spirits. But there is still some spots i missed. I was working on it until 11 PM outside underneath a dust to dawn light. So i suppose that’s an excuse. My next project for it is to build an outfeed ...

Read this entry »


View GlennsGrandson's profile

From Rust to Lust, can I bring it back? #6: Tedious Tape-up... and jigs? Bed/Fence protection??

04-25-2012 08:05 PM by GlennsGrandson | 4 comments »

Hello again, I’ve got quite a bit accomplished since my last post, but it took much longer than anticipated. I had to finish cleaning a few little pieces here and there and wipe off the never ending paint dust with mineral spirits. Once I’d clean a piece I’d tape it off, lots of masking tape and razor blades. The only pieces I have left are the pieces of the head. I have to clean up the head yet and probably replace the bearings, they felt good and sounded good but they prob...

Read this entry »


View Mark Duncan's profile

Delta Rockwell Super 900 Radial Arm Saw #1: 1958 or 59 Delta Rockwell Super 900

08-05-2009 10:36 AM by Mark Duncan | 1 comment »

This is another Craigslist buy my dad made for only $60. And for $60, this saw runs like a champ! its over 50 years old and runs like it just came off the line. It just looks like its been around for a while.(These are pictures before i began restoring the saw)

Read this entry »


View Jeff's profile

Estate Sale Finds #3: - Delta Milwaukee 6" Jointer

04-24-2015 10:11 PM by Jeff | 9 comments »

Super excited about the deal I got today! So what did I find this morning as I went to a few Estate sales? An awesome 6” Delta Rockwell Jointer with a 3/4 hp motor. I have been wanting a jointer, but did not have the funds to go out and buy something new. I didn’t want a desktop jointer, reviews seems mixed, and I do not have room for a larger floor model. This is the perfect size for what I am doing right now. I know it does not look that great, but I really like these old ...

Read this entry »


View RedRooster's profile

Repair of Rockwell Radial Arm Saw --model 12-ras

11-07-2008 04:28 AM by RedRooster | 3 comments »

Can someone help with information or experiences on repairing my old Rockwell 12 RAS? (Ser# KU2439). I purchased the saw from the state government surplus warehouse. I have not started to repair it yet. I thought someone might have already repaired one and have some advice on where to start, where to find manuals, and what to problems to look for. The saw is mechanically sound, motor is can be turned easily by hand and the bearings feel fine, but the motor does not seem to get any powe...

Read this entry »


View Alexdi's profile

Starting from zero

12-02-2011 07:51 AM by Alexdi | 4 comments »

About three months ago, I wanted to build a small furniture piece for my rec room. This quickly ballooned (as these things do) into putting together a full workshop. The plan to pick up an old $100 portable saw morphed into a recent contractor saw, and then on a whim, into a cabinet saw. Here’s what I discovered: The saw: There are no pictures of the saw fully assembled because it was dark when I bought it and in pieces when I got it home. A few shots of some parts: I’...

Read this entry »


1 2 3 next »
29 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com