LumberJocks

Woodworking blog entries tagged with 'qswo'

  • Advertise with us
View pintodeluxe's profile

Stickley / Jeff Jewitt Arts and Crafts Finish

04-15-2013 01:24 AM by pintodeluxe | 14 comments »

I wanted to recreate this Jeff Jewitt finish from Fine Woodworking #157, however the article didn’t list which formula was used. I consulted with Jeff, and it was Transtint Brown Mohogany dye, followed by McCloskeys Walnut stain. McClosky no longer makes stain, but sold to Valspar / Cabot. ---So I set out to make a sample board to achieve the rich, dark color I was after. ---The top colors are stain only, the middle colors are dye first then stain, and the bottom color is dye only. ...

Read this entry »


View pintodeluxe's profile

Stickley #369 Morris Chair #6: Leather Upholstery

03-24-2014 11:12 PM by pintodeluxe | 33 comments »

I took a leather sewing class to learn how to make the Morris chair cushions. -----The seat cushion and the ottoman cushion require web frames. Here I am milling the half-lap components for the web frames. -----Web frame assemblies are glued together. The seat frame should be sized 1/4” smaller in all directions than the opening in your chair, to allow room for the leather and two layers of batting.-----Corner blocks are added to the large seat cushion for additional strength. -----I...

Read this entry »


View pintodeluxe's profile

Stickley #369 Morris Chair #1: Leg Laminations and Angled Tenons

02-24-2014 09:27 PM by pintodeluxe | 6 comments »

Here is the project at hand, a slant arm Morris Chair. I am working off plans from the Popular Woodworking April 2011 issue, which I recommend you buy. The Author is Robert Lang. He posted a free diagram to Sketchup, but with this detailed of a project, you will want to order the back issue. My techniques differ from Robert’s methods significantly, so I will try to elaborate along the way. -----I like to start by laminating the legs for quartersawn figure on all four sides. ...

Read this entry »


View pintodeluxe's profile

Arts and Crafts Entertainment Center / Sideboard #1: Side Panels

02-26-2013 08:38 PM by pintodeluxe | 9 comments »

Here is the next project, an entertainment center that is reminiscent of a Stickley sideboard. The central slat detail gives a nod to Kevin Rodel. The backsplash features my “wedge and strap” detail, also found on my A&C dressers. ----- Leg blanks are laminated from 3/4” stock. Next I add 1/4” thick veneers on two sides. Even though the finished veneers will only be 3/32” thick, I leave them 1/4” thick for now. I find that 1/4” stri...

Read this entry »


View pintodeluxe's profile

Twin Tenon Arts and Crafts Dining Table #1: Frame components and tabletop

08-22-2012 06:09 PM by pintodeluxe | 2 comments »

I wanted to design an arts and crafts dining table that included arched rails and twin keyed tenons. I like several of the Stickley tables, but wanted something original. I like the feel of Keven Rodel’s Talesien desk, which served as inspiration for this table. The stack of parts is growing… Initial frame assembly… And the tabletop glueup…

Read this entry »


View pintodeluxe's profile

Twin Tenon Arts and Crafts Dining Table #6: Finishing Touches

09-11-2012 04:49 PM by pintodeluxe | 9 comments »

Top finished Frame assembled Four-inch long T30 lags secure the top timbers. Laminated or not? By laying out my jointlines carefully, I was able to laminate some 8/4 and 5/4 together. The glueline is at the angle of the timber, so it is not visible. In addition, I laminated some thin veneers on both sides. Back to the project page… http://lumberjocks.com/projects/71281

Read this entry »


View pintodeluxe's profile

Arts and Crafts Library Desk #1: Building Legs, Cutting Mortises

11-27-2013 08:39 PM by pintodeluxe | 9 comments »

Well after taking second place at the Portland Woodworking Show with the last project, a cherry trundle bed, it was time to start the next project. -----The current project is a small library desk for my son’s room. He helped in the design phase, choosing corbels over spindles for the sides of the desk. We also have a special white oak board with a bullet lodged in it. Caden decided he wanted to incorporate it into the desk. -----I am fortunate to have a stack of 400 b.f. of white...

Read this entry »


View DocK16's profile

Machinist Chest #1: Machinist Chest

01-28-2010 05:52 AM by DocK16 | 12 comments »

Woodsmith Magazine has challenged me again with an interesting project. This machinist chest involves numerous types of joinery including 1/8 inch tenons to hold together 3/8 inch boards to make the drawers, box joints and stub tenons and raised panels. I hope to take you along thru the cut list, assembly, and finish. Looks like an interesting project requiring exacting specifications. Here is picture of the iWoodmith Issue showing a pic of the project. All the pieces of milled 1/2 an...

Read this entry »


View pintodeluxe's profile

Twin Tenon Arts and Crafts Dining Table #4: End Assembly Glueup and Decorative Pegs

09-04-2012 05:59 PM by pintodeluxe | 1 comment »

End assembly joints are drawbored and pegged with 3/8” walnut pegs. I use this pounding block to set the walnut buttons to the right depth. The buttons conceal slotted screw holes that attach the breadboard ends. Next up is fitting the keyed tenons that connect the two end assemblies.

Read this entry »


View pintodeluxe's profile

Stickley #369 Morris Chair #7: Ottoman

03-25-2014 04:24 PM by pintodeluxe | 8 comments »

Here I am building a small ottoman to compliment the Morris Chair. -----The ottoman legs were laminated with thin veneers. As with the chair, I used 1/4” thick veneer strips that are later planed down to 3/32” thickness. -----The ottoman legs are planed to their final size of 1-3/4” square, and mortised to receive 1/2” thick tenons. -----I do an initial assembly to see how the joints fit. Everything is scaled down on the ottoman, compared to the Morris chair. Th...

Read this entry »


1 2 3 4 next »
38 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com