LumberJocks

Woodworking blog entries tagged with 'process'

  • Advertise with us
View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #2: Apron Panels and a Start to the Legs

02-01-2016 04:12 PM by jeth | 5 comments »

Hello all, things have been deathly quiet on the first installment of this blog, which I started due to interest on the project I posted here. Having started, I should go on, so in this post I’ll show how the remaining veneered panels for the table aprons and the legs came together. Here is the substrate for one of the small side apron panels being planed up, with the thick re-sawn veneer that would be stuck to it. The substrate is a piece of Primavera and I did not back it with a ...

Read this entry »


View PeterDominic1983's profile

From cluttered garage to organized (hopefully) wood shop!! #5: Journey continues - time to tackle the bench and tool area!!

06-07-2016 02:19 AM by PeterDominic1983 | 2 comments »

This is SUPER slow-going… It is really difficult to see in pictures, for many reasons. Obviously, if someone is viewing the pics, there is only a cursory and “2D” perception of what is really around! But, writing as the person doing all the cleanup? I feel a massive and satisfying sense of accomplishment. And I am not nearly done yet! Finally began removing lots of the items and storage boxes/bins from the garage; I have been staging all the containers ...

Read this entry »


View OrangeElk's profile

Hand Tool Driven Lowboy Build

04-28-2016 01:15 PM by OrangeElk | 4 comments »

The following is intended to document my process for building a lowboy. The build is primarily done with hand tools but I did end up using power tools as the project got going. This build was for a independent study so I had access to the university lab’s machines. The lowboy I chose looks like a transition piece between William and Mary to Queen Anne. This low boy was featured in PWM by Glen Huey, but I never ended up reading the issue, I made the plans from pictures. Starting the p...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #5: Shaping the Legs

02-07-2016 04:03 AM by jeth | 1 comment »

hello all.. Now, having got the parts of the basic structure ready I wanted to get this glued up solid before fitting the parts that form the drawer pocket so I needed to get the legs shaped. Apart from the use of the Cocobolo panels the legs were the only other part I was fairly certain of once I knew this would be a table. I had seen some legs I liked and which seemed like they would fit here. I had a photo of the piece that sported those legs and imported it into sketchup. I used th...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #1: Veneered Panels/Framing the Top

02-01-2016 05:12 AM by jeth | 0 comments »

Hello all, I had a couple of peeps interested in seeing the process shots of the Cocobolo and Leopardwood table with drawer that I posted, so I thought I’ll blog it here split into a few parts so nobody has to scroll through it all in one go… You can see the finished project here. I don’t have a shot of the small Cocobolo board I was given that inspired this table before I started cutting it up but it was a couple of board feet. There was a lovely rich heartwood section d...

Read this entry »


View Dan'um Style's profile

Haunted Forest TWO start to finish ... artwork to ebay ... stoneware tile frieze from wood to stone

10-12-2007 06:54 AM by Dan'um Style | 9 comments »

Inspired by Mark’s blog on his Sandzen inpired wood carving … thought might try one myself. The idea for Haunted Forest TWO. Photo I digitally edited on my laptop. Layered a couple photos, grayscaled , rescaled, stretched, deformed, negative and pixelated …. This is a challenge to myself. I have never made a carving this big, nor will I use the exact same methods that I have used in-the-past. Hope to learn a few new tools and teach myself a few new tricks via ...

Read this entry »


« prev 1 2
16 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com