LumberJocks

Woodworking blog entries tagged with 'primavera'

  • Advertise with us
View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #5: Shaping the Legs

02-07-2016 04:03 AM by jeth | 1 comment »

hello all.. Now, having got the parts of the basic structure ready I wanted to get this glued up solid before fitting the parts that form the drawer pocket so I needed to get the legs shaped. Apart from the use of the Cocobolo panels the legs were the only other part I was fairly certain of once I knew this would be a table. I had seen some legs I liked and which seemed like they would fit here. I had a photo of the piece that sported those legs and imported it into sketchup. I used th...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #4: Apron Frame & Front Rail Joinery

02-04-2016 07:51 PM by jeth | 4 comments »

Hello all (echo,o,o,o) several hundred “reads”, no comments, so either you’re all riveted to your seats awaiting the next installment, or that’s several hundred open page, scroll down a bit, go read something more interesting. Not wanting to leave this half way through I shall proceed with the upper aron frames and front rail joinery. The apron panels were to be framed with pieces of leopardwood. Here you can see the top pieces which are grooved to fit onto a rabbe...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #3: Gunstock joints as an afterthought.

02-03-2016 03:23 AM by jeth | 0 comments »

Hello all, just in case anyone is following along I’ll continue here with how I added the gunstock joints to the legs as an afterthought.I had already prepped the leg blanks and cut mortises when I decided (influenced in large part by a nice arts and crafts hall table in a magazine article) that the table would benefit from”flowing” the legs into the apron frames with gunstock joints. This will probably be easier to visualise if I show you the end result, so this is what ...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #2: Apron Panels and a Start to the Legs

02-01-2016 04:12 PM by jeth | 5 comments »

Hello all, things have been deathly quiet on the first installment of this blog, which I started due to interest on the project I posted here. Having started, I should go on, so in this post I’ll show how the remaining veneered panels for the table aprons and the legs came together. Here is the substrate for one of the small side apron panels being planed up, with the thick re-sawn veneer that would be stuck to it. The substrate is a piece of Primavera and I did not back it with a ...

Read this entry »


View jeth's profile

Cocobolo and Leopardwood Table : Process pics. #1: Veneered Panels/Framing the Top

02-01-2016 05:12 AM by jeth | 0 comments »

Hello all, I had a couple of peeps interested in seeing the process shots of the Cocobolo and Leopardwood table with drawer that I posted, so I thought I’ll blog it here split into a few parts so nobody has to scroll through it all in one go… You can see the finished project here. I don’t have a shot of the small Cocobolo board I was given that inspired this table before I started cutting it up but it was a couple of board feet. There was a lovely rich heartwood section d...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com