LumberJocks

Woodworking blog entries tagged with 'plane knob'

  • Advertise with us
View OSU55's profile

Handplanes #4: Custom Hand Plane Totes Stanley & LV Veritas

09-14-2014 01:28 AM by OSU55 | 1 comment »

I don’t like Stanley or Veritas factory totes. I made modifications to the drawings provided by Lee Valley. The result is kind of in between the two designs. I start with stock about 1-1/4” thick and end up slightly less. The designs adjust the tote angle, making the Stanley more upright and giving the LV tote a little more angle. The front lower and rear upper radii are smaller and the positions adjusted to affect the hand angle and provide more vertical room for larger hands. My...

Read this entry »


View mafe's profile

Drill press table and much more! #4: Drill press turning (making a plane knob) Blog

10-07-2010 11:51 AM by mafe | 24 comments »

Drill press turning Making a plane knob on the drill press challenge. Last week I needed a knob for a fence I was making for my no. 3 and 4 planes, and was ready to go to the lathe.- But decided to challenge myself by making it on the drill press, with the simplest means I could find (yes I’m a child).I also took pictures as I went along so I could share it with those who don’t have a lathe. This was how it turned out. A piece of wood, if you don’t happen to have a piece ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com