LumberJocks

Woodworking blog entries tagged with 'parts'

  • Advertise with us
View Blake's profile

Parts For Tools

12-03-2007 09:13 PM by Blake | 2 comments »

I just wanted to let everyone know, in case they don’t already. At our Used Tool Store we sometimes need to make repairs on tools in order to resell them. When we need parts we go to Tool Parts Direct (toolpartsdirect.com) This is the best way that we have found to get parts for tools. If you go to the website and type in the brand and model number you will get a blown-apart schematic of almost any tool ever made. (Click on the schematic for a full sized view). There is also a parts...

Read this entry »


View Woodwrecker's profile

Fastner & Small Parts Storage

06-05-2011 06:46 AM by Woodwrecker | 13 comments »

Hi everyone. I was trying to figure out a way to store some of my fasteners and small parts which lead me to construct this. Take some Dollar Store baking pans, some scrap wood, and a little routing, sanding & painting and problem solved. I then use my label maker to identify what is in each pan. I’m still sorting things out, but so far it’s worked great. You can take the one you need to your work area and bring it back when you’re done. I don’t think it&#...

Read this entry »


View PurpLev's profile

TheWoodWhisperer Woodworkers Fighting Cancer Rocking Horse #1: Making the cut

10-09-2011 02:46 PM by PurpLev | 5 comments »

This project is building a childs rocking chair. Marc at thewoodwhisperer.com is organizing this and this is a charity fund raising project towards woodworkers with cancer. For more info please visit http://thewoodwhisperer.com/wfc/ and join in on the project. it is a nice and fun project to work on, can involve working with the kids in various steps, and is god a good cause both in terms of the charity and in terms of the rocking horse for the kids! For a while there I really wanted to jo...

Read this entry »


View Todd A. Clippinger's profile

The American Craftsman WorkShop #24: Mobile Parts Cart

02-21-2010 09:59 PM by Todd A. Clippinger | 15 comments »

During the construction of a project there is often a need for organizing and storing parts. This is obvously a temporary need because as the work progresses, you construct parts and then assemble them. I like to use a 4’ scaffold as a mobile cart to store and organize the parts that I have made. I bought my scaffold for $99 although I have noticed that the price has risen on them over the last couple of years. It comes with steel platform shelves to stand on and I used plywoo...

Read this entry »


View jm82435's profile

Gloat or just Glut? #1: Hand Planes and Parts

08-08-2014 10:33 PM by jm82435 | 10 comments »

These were from a school shop I am sure. There are a couple of nice ones and a lot of parts… $5.

Read this entry »


View Brad's profile

Rust-hunting serendipity—A year of searching turns up “Precious” parts

04-12-2014 02:10 PM by Brad | 8 comments »

About a year ago, I “restored a Goodell Manufacturing Co. miterbox”: http://lumberjocks.com/planepassion/blog/34755 . It was lacking both of its accessories when I originally bought it. A slide post to facilitate crown moulding cuts, and a length gauge slide. It was also missing a slide retention clip and a thumbscrew. That nagged at me. So much so that I made a clip and bought a jig thumbscrew to secure it. I also started making wooden prototypes of the slides. That ...

Read this entry »


View A Slice of Wood Workshop's profile

Tool Tote Restoration- Distressed Paint Job

09-11-2017 10:22 PM by A Slice of Wood Workshop | 7 comments »

I got a chest that I am planning on turning into a hand plane chest. It already has a place for the handsaws on the lid. Inside the chest was an old tool tote or parts tote. It was in rough condition, but I decided to try and save it anyway. Let me know what you think. Hit that subscribe button.

Read this entry »


View Chris Davis's profile

Chi Omega Dorm Room #4: Cutting, Cutting, And More Cutting

06-12-2009 01:34 PM by Chris Davis | 0 comments »

Started cutting out the parts to the 9 additional single beds only and WOW that is a lot of cutting. I figured 522 pieces (58 each). The drawer have the most at 423 (47 each). I didn’t just cut and rip them, some had to be edge banded and then comes the sanded. I got 2 days to work. I will be going to Church camp for a week. I’d like to have the headboards built and the drawer units ready to assemble before I leave. The week I’m gone, hopefully my crew can get the d...

Read this entry »


View plaidflannelman's profile

Stevens 311 restoration #2: Resource gathering

04-09-2008 07:14 PM by plaidflannelman | 1 comment »

I will be writing this in sort of walkthrough form; so I will include my resources as they come. I am getting parts from Numrich Arms and the direct page for this gun is here. They have a passable exploded diagram on that page but the one I use comes out of the Gun Digest diagrams book. Same diagram for the most part, though. I have basic tools for the project but when working with firearms, fine or otherwise, I would recommend a good set of gunsmith screwdrivers and punches. These and a...

Read this entry »


View Lee Barker's profile

Trestle Table Desks #3: Fixing a flub and stacking parts

11-13-2010 02:57 AM by Lee Barker | 4 comments »

The dado for the juniper panels (see the image of the parts) is quite wide. I used a 1” straight router bit in the saw table. I was inattentive on one and let it get by about 3/4”. Though the error would likely never be seen, I decided to plug it. In the image you’ll see the plug glued in and the scrap from which it was taken. The second one shows the result of putting a little glue in the voids and sanding with a RO machine and 150x. All the parts are now machined f...

Read this entry »


1 2 next »
13 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com