LumberJocks

Woodworking blog entries tagged with 'multi-use rip fence jig'

  • Advertise with us
View HappyHowie's profile

Trestle Table #19: Multi-use RIP Fence JIG

10-20-2016 12:45 AM by HappyHowie | 0 comments »

Although I referenced Boy Van Dyke’s Fine Woodworking Magazine article about his multi-use RIP fence jig in a prior blog post, I thought I should include more photos showing the melamine fence that I bolt to the RIP fence jig in order to cut my tenons on my Saw Stop table saw. I made two versions of this melamine fence; one is the height specified in the magazine’s article. The other fence is two inches taller than the magazine’s article. I also implemented Bob’...

Read this entry »


View HappyHowie's profile

Trestle Table #12: Next Steps: Cut Tenons Using Twin Blade Joinery Method

09-17-2016 09:37 PM by HappyHowie | 3 comments »

I began work in my shop this morning by squaring up the corners or ends of these router bit made mortises. As you can see I have an Irwin Marples 3/8” or 10 mm hand chisel as well as a Robert Sorby mortising chisel in the same size 3/8” or 10 mm. For this blog entry I am writing what I plan to do next instead of writing briefly what I did in my shop. Maybe this way I will be more thorough and clear of what my steps will be. I subscribe to Woodcraft Magazine. I lov...

Read this entry »


View HappyHowie's profile

Trestle Table #11: Next Steps: Cut Tenons Using Twin Blade Joinery Method

09-17-2016 09:33 PM by HappyHowie | 0 comments »

I began work in my shop this morning by squaring up the corners or ends of these router bit made mortises. As you can see I have an Irwin Marples 3/8” or 10 mm hand chisel as well as a Robert Sorby mortising chisel in the same size 3/8” or 10 mm. For this blog entry I am writing what I plan to do next instead of writing briefly what I did in my shop. Maybe this way I will be more thorough and clear of what my steps will be. I subscribe to Woodcraft Magazine. I lov...

Read this entry »


View HappyHowie's profile

SawStop Assembly #5: Bob Van Dyke's Multi-Purpose Rip Fence JIG

05-07-2016 03:51 AM by HappyHowie | 7 comments »

Since I now have a new SawStop PCS table saw I have been looking for a good example or plan so I can make a universal rip fence JIG for cutting rabbets and tenons on my new table saw. Just this past week someone published on YouTube an old video that was used in a Fine Woodworking Magazine article published in December 2012. The article covered a rip fence JIG Bob Van Dyke designed for his SawStop’s rip fence. He bolts onto the JIG sacrificial boards for cutting rabbets and raised pa...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com