LumberJocks

Woodworking blog entries tagged with 'mini max'

  • Advertise with us
View CharlieK's profile

A quick tour of my shop.

12-06-2015 07:31 PM by CharlieK | 15 comments »

I have been meaning to do a shop tour video for some time, but never quite got around to it. Then I met a young photographer named Michael DeVowe. Michael graciously came over to my house and filmed this for me. I have received “feedback” in the past about too many “um’s and ah’s” in my presentation. After Michael gave me the completed video I went back and did some post editing and cut out most of the um’s and ah’s. Let me know how you ...

Read this entry »


View Canadian Woodworks's profile

In the wood shop today #15: Re-sawing some beautiful Walnut for seats

11-01-2012 01:51 AM by Canadian Woodworks | 2 comments »

Using a band saw I’m going to re-saw a solid Walnut board and 12’’ tall and 1.5’’ thick into 2 boards that will feature a beautiful grain book match. This board is to be used as the underside of a custom rocking chair seat. Check it out! Thanks for having a look always fun to share. (-:

Read this entry »


View Canadian Woodworks's profile

Time lapse Woodworking #7: Resawing a 13'' tall 8/4 walnut board

01-24-2011 05:31 PM by Canadian Woodworks | 11 comments »

Here is another video in our time lapse woodworking series, this time around I’m re-sawing a 13’’ 8/4 solid Canadian Black Walnut board about 33’’ long into 4 pieces that need to end up 3/8’’ thick. These will be the panels in a frame and panel center divider for a shelving unit we’re building for a display for a local store. First I throw on a new blade, I’m just using a 3/8’’ blade from our local band saw blade place cal...

Read this entry »


View Canadian Woodworks's profile

re-sawing some boards

02-25-2010 04:11 AM by Canadian Woodworks | 0 comments »

Today we resawed some 3’’ wormy soft maple I had extra from my rocking chair project into 1/2’’ drawer sides. The largest was about 12’’ tall were using a MM20 / Driftmaster / Resaw master blade must say what a great combo. We are also re-sawing some 1’’ old growth southern yellow pine to 3/8’’ for the door and drawer fronts, I actually gummed up a blade and had to remove it for cleaning. I did some reading and also remembered we ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com