LumberJocks

Woodworking blog entries tagged with 'lilac'

  • Advertise with us
View frank's profile

WoodWriting Haiku Thursday's --by RusticWoodArt #67: Jointly Epoxied

04-02-2010 05:48 AM by frank | 7 comments »

Jointly Epoxied ….white oak bleeds moon red,my heart bonds with your passion,jointly epoxied….—by flp —————————————————————————————————————————————————————&#...

Read this entry »


View frank's profile

"Hobbit Holes in MyWorld" --by RusticWoodArt #69: My Zone of Wood Art

03-23-2010 08:35 AM by frank | 8 comments »

My Zone of Wood Art ….art is the interpretation of what is before you, and therefore needs no-out-side influence to make it more then it is in this moment. The problem that many have with art is that it is all-ways regulated to some other plane of our existence, out-side the time-work of where we are now. Because the many see art as so ‘other’, these many lost souls to the world of art, will in-deed all-ways be seeking for art as if it is some-thing that is found in the so ...

Read this entry »


View scottb's profile

Lilac Lamp #4: steambending box

04-16-2007 02:53 AM by scottb | 7 comments »

Been so caught up in my boxmaking, I figured I’d better get this box built, so I can go onto the next step when I”m ready… This will be the “steam chamber” to let me stretch the legs a bit. Just needs the doors, a rack, and some steam (lots of steam).

Read this entry »


View scottb's profile

Lilac Lamp #3: Tripod all in a twist

03-11-2007 12:19 AM by scottb | 2 comments »

Having successfully burned out my Dremel, I went for the cordless drill as well as my chisels. Judging by the amount of wood i still had to go through, I’d have likely killed another dremel in the process! I guess they are made for lots of different jobs, not so much hogging off wood for extended periods. I’ll definately be looking into those carving tools Dick suggested. Didn’t take too long to get all three legs liberated from each other, was tricky with the “can...

Read this entry »


View scottb's profile

Lilac Lamp #2: Breakthrough!

02-19-2007 03:22 AM by scottb | 8 comments »

Last time I merely defined the legs (or let the crack and grain define them for me), twists and all. Today, armed with some new attachements for the Dremel I cut two channels clean on though to the middle, “freeing” one leg, and nearly completeing the third channel to free the other two. Apart from the wood on the surface, this is some nice, hard wood, and was putting up quite a fight, so this is the progress so far. The Dremel was starting to heat up, and I think I’ll need ...

Read this entry »


View scottb's profile

Lilac Lamp #1: Finding some legs to stand on.

02-05-2007 06:20 AM by scottb | 4 comments »

Quick update after such a long (long) break from this project. As previously blogged elsewhere, the lamp will indeed be made from a single piece of lilac with the lower portion divided into three legs straddling a stone. Took months of on-and-off pondering, and some brainstorming, but now, having worked out the next few challenging steps, I can put the “lamp back on!” Today I took my Dremel to the cracks and splits on one end (after finally deciding which end was up) and...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com