LumberJocks

Woodworking blog entries tagged with 'leg vise'

  • Advertise with us
View Jeremiah's profile

Balanced Work Bench #2: building the leg vise

07-18-2013 03:38 AM by Jeremiah | 0 comments »

i have never made a leg vise before and i have no idea what to expect with the one i made. The basic concept came from Shop Notes. And i like the basic concept. However, i do NOT like the price of ACME Rod, ACME nuts or ACME ANYTHING. so i went with “off the shelf” 3/4” threaded rod from LOWES. I dont know if this will bite me in the butt or not. But just in case, i built the vice so i could change it out if i need to use a better threaded rod. The dimensions ...

Read this entry »


View jusfine's profile

Roubo Inspired Bench #5: Getting closer - finally getting the slabs on top of the bench, & an orange dog or 2

05-25-2013 09:51 PM by jusfine | 9 comments »

The rails have been assembled, legs attached to the cabinet, a little clean up and should be ready to mortise for the slabs. It appears I have some corrupted images on my memory card, so may not be able to post any of the photos of mortising or attaching the slabs through the rails with the SPAX type screws. Slabs have been fastened to the top with one screw at each end, there is a 2” gap between the two sections. I wanted a wide enough space to be able to use a Be...

Read this entry »


View cpd011's profile

Workbench #1: The Dunnage Workbench

02-12-2013 03:28 PM by cpd011 | 0 comments »

Hello all! Let me first just say that I should change my name to The Lurker. I don’t post much but I might be tied with some of you for the most page views. I check lumberjocks more times every day than my wife checks facebook. Though I built a workbech when we first bought our house four years ago (24 hr. workbench), lem with woodI have never been totally satisfied with it. It has served me well but I have serious workbench envy. I’m a hobbyist and make/fix things around the h...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #17: Leg Vise Part 2

01-18-2013 04:30 PM by Mauricio | 31 comments »

Welcome back folks. Progress has been slow but steady. I’m in the home stretch now. I need to finish up this leg vise, then the lower shelf and I’ll be ready for final assembly. A while back BrandonW gave me a Jatoba board. Its the same stuff I’m using on my deadman. Its beautiful dense wood and I’ve been milking every last scrap of it. I used the below scrap as my garter even though it is the checked end of the board. I ended up having to use a lot of superglue ...

Read this entry »


View grfrazee's profile

SYP Spilt-Top Roubo Workbench #1: 80% Complete

01-03-2013 02:53 PM by grfrazee | 13 comments »

I was fortunate enough to be able to take off Christmas week and get a good start on my workbench. I’ve had the idea to build one in my head for a few months now, and have been slowly accumulating the parts and hardware necessary. My intention was to make it possible to take the bench apart and move it with relative ease since I will be moving it from my dad’s shop once I have a shop of my own (side note: apartments suck). I used southern yellow pine, special ordered from Men...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #16: Leg Vise Part 1

12-22-2012 02:51 PM by Mauricio | 25 comments »

Welcome back to my blog series folks. Thanks for following along on this long journey of mine. It’s hard to believe I started cutting up the parts for my top in January. It’s taken me almost a year. However there were some detours taken along with way on other project. I’m in the home stretch now! I needed a hub for the screw. One of the luxuries of making your own screws is that you can make the hub out of any wood you want. I went with some QSWO I had left from my stretchers. I think ...

Read this entry »


View bern92's profile

Roubo bench for my 5 years old son #1: Roubo top, legs, stretchers and Homemade Leg vise

11-07-2012 03:52 PM by bern92 | 8 comments »

I’m building this bench for my 5 years old son so he can work with me in the shop. He love to work with me. He was asking me for a bench at his size for the past year. I built the top, leg and stretcher out of left over from my garden shed. I use walnut for the vise chop and maple for the hub. I’m building the vise system myself and it’s going very well. I still have to make the garter plate to hold the hub with the vise chop. Next step front and back stretchers and moun...

Read this entry »


View RaggedKerf's profile

My First Workbench #32: Day 33: Leg Vise finished!

10-24-2012 12:08 AM by RaggedKerf | 0 comments »

For the glory shots of the completed leg vise, please click here. Today, I finally can scratch off this component of the bench at last! I came out to shop more confused than ever on how to proceed after ending the session yesterday in frustration. So I turned on the radio and put everything together and watched carefully how the threaded rod affected the garter and tried to catch it. It occurred to me I should try and either (a) make the half threads surrounding the garter grove mor...

Read this entry »


View RaggedKerf's profile

My First Workbench #31: Day 32: Mounting the Leg Vise (part 4)

10-23-2012 12:15 PM by RaggedKerf | 2 comments »

For the image heavy version of this post, please click here. At last, the day arrived when I could put it all together and complete the leg vise. Or so I thought. This post is actually a combination of a couple days work because I just couldn’t bring myself to post nothing but failure after failure until it was done. With some helpful tips from Sylvain over at the Lumberjocks site, I was able to (almost) complete the task of getting that garter (that I thought was an unmitigated...

Read this entry »


View RaggedKerf's profile

My First Workbench #30: Day 31: Mounting the Leg Vise (part 3)

10-22-2012 11:59 AM by RaggedKerf | 2 comments »

Please click here to see the version with pictures. I made some good progress for the 20 minutes I had to work on the bench today. I used the utility knife to chamber the edges of the two locking nut/wood discs I fabricated, then polished off the wood with 220 grit sandpaper for a nice smooth finish that didn’t end up overly round. I also got out the 3/8” paddle bit and started to hog out the slot for the support guide at the bottom of the leg vise. I ran out of time to...

Read this entry »


« prev 1 2 3 4 5 6 next »
51 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com