LumberJocks

Woodworking blog entries tagged with 'leg vise'

  • Advertise with us
View Mauricio's profile

Workbench Build - Splayed leg French Bench #14: Wooden Screw - Another attempt

10-19-2012 02:02 PM by Mauricio | 61 comments »

It didnt turn out well, still licking my wounds. Here is briefly what happened… Made a new jigAfter one test screw, I successfuly made one that had reasonable little chipping, I was happy with it.I actually cut the hub off a reject screw and reused it on this one. Tapped the leg Tried the screw, but it binds up after a little bit. I kept tapping the threads deeper and deeper hoping it would fit but it wasn’t the diameter of the hole, it was the thread pitch, and since the...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #6: Wooden Screw #2

05-21-2012 04:44 PM by Mauricio | 43 comments »

I think most of you have seen a lot of these pics on other thread but I’ll post them here for the Blog with more detail. As you know last time I tried to carve my screw by hand, it worked but was slow going. So I built the router jig but have been having trouble dialing it in perfectly. Here is the router jig I made. As you can see its a loose fit which is why I got a lot of chipping in the tips of the thread, I was cutting to deep. This is what happened when I fed my hand car...

Read this entry »


View HokieKen's profile

Building my Workbench #15: Little More Progress, Nearly Done

07-24-2017 12:03 PM by HokieKen | 32 comments »

Well, I got some time in the shop this weekend. I split it about 50/50 between my Beer Swap project and my bench. Just wanted to post a quick update on where I’m at. Now that everything is assembled and pinned, it’s time to get to work on the “fun”stuff… well mostly. First up was to get the end vise back on. Now, this is the one part of my build I’m not totally satisfied with. There’s just too much slop in this hardware for a chop as long and ...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #17: Leg Vise Part 2

01-18-2013 04:30 PM by Mauricio | 31 comments »

Welcome back folks. Progress has been slow but steady. I’m in the home stretch now. I need to finish up this leg vise, then the lower shelf and I’ll be ready for final assembly. A while back BrandonW gave me a Jatoba board. Its the same stuff I’m using on my deadman. Its beautiful dense wood and I’ve been milking every last scrap of it. I used the below scrap as my garter even though it is the checked end of the board. I ended up having to use a lot of superglue ...

Read this entry »


View Mauricio's profile

Workbench Build - Splayed leg French Bench #16: Leg Vise Part 1

12-22-2012 02:51 PM by Mauricio | 25 comments »

Welcome back to my blog series folks. Thanks for following along on this long journey of mine. It’s hard to believe I started cutting up the parts for my top in January. It’s taken me almost a year. However there were some detours taken along with way on other project. I’m in the home stretch now! I needed a hub for the screw. One of the luxuries of making your own screws is that you can make the hub out of any wood you want. I went with some QSWO I had left from my stretchers. I think ...

Read this entry »


View shipwright's profile

V8 Degree wedge powered workbench #1: Some Features and Operational Videos.

08-31-2012 08:56 PM by shipwright | 25 comments »

While this is the beginning of my construction blog for the V8 Degree bench, I’m not actually going to get into the build just yet. There are a few more features that I didn’t want to clutter the project post with and I’ve added a couple of demo videos on the vices. I thought it would be best to start with a full view of the bench and its operational features first and get into the construction process in the next segment. This photo shows the dog hole inserts that hide a...

Read this entry »


View Woodknack's profile

Farm Bench Leg Vise #1: Roehl Leg Vise

11-13-2014 03:45 AM by Woodknack | 23 comments »

[update: better pics on my personal blog]http://thewoodknack.blogspot.com/2014/11/unusual-early-20th-century-farm-leg-vise.html Posting this here so it doesn’t get buried in the workbench thread. While perusing Google Books I ran across an unusual leg vise arrangement on a Nicholson style bench in Farm Woodwork by Louis Michael Roehl, 1919. The leg vise has two angled braces rather than the usual pin bar. The angled braces, along with the screw, form a triangle that rides undernea...

Read this entry »


View CartersWhittling's profile

Workbench #17: Completion

11-22-2011 05:17 AM by CartersWhittling | 22 comments »

Hello, this is probably my last workbench blog entry, now that my bench is complete! Like I said in my last blog, the workbench has been complete a couple weeks before this post on November 12. With my last post I had wrote about completing the base. After I had the base assembled, glued up, and drawbored I placed the bench top onto the base. Previous to putting the top on the base I had put one coat of boiled linseed oil on the underside of the top. The top is removable from the base, I deci...

Read this entry »


View Ron Ramsey's profile

Work Bench Constuction Journal #1: My Dream Workbench - A Journal of Progress

01-24-2012 10:41 PM by Ron Ramsey | 21 comments »

I have finally gotten around to making a real workbench for my new, and smaller, shop (see my previous entry). I am in the planning phase right now. I’ve been pouring over plans, books, philosophy of workbench design. I guess it’s safe to say I may be over thinking this. But the design is half the fun. So, I’ve put together a journal that you can download and look at. It has pictures and explanations of some of the design considerations I’m mulling over. I am ...

Read this entry »


View yuridichesky's profile

Workbench #7: Leg vise

03-02-2014 02:02 PM by yuridichesky | 19 comments »

Got sick a little and can’t work in the shop, so it’s time to blog :-)...In total I spent quite a bit time working on leg vise, but to my excuse I had to built most of the parts from scratch except for Jim Ritter’s (aka Boatman53) chain mechanism . I’m more than happy with this chain-driven vise and highly recommend it. Jim, thank you a lot for all your effort to send your kit up here to Russia!...Ok, leg vise implies that there must be something done with the leg to...

Read this entry »


1 2 3 4 ... 6 next »
51 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com