LumberJocks

Woodworking blog entries tagged with 'lazy susan'

  • Advertise with us
View degoose's profile

Open weave Lazy Larry #2: Design changes already...

07-15-2011 09:43 PM by degoose | 7 comments »

The open weave Lazy Larry is going through some design changes… already… I have decided to use Purple Heart and Silver Ash for the accents… while still maintaining the Huon Pine for the background… The timber is being milled… The purple heart…... and the Silver Ash…. Milling will be completed tomorrow as I am off to Toowoomba this morning with Aaron….. to do a demonstration on the TWC for the Toowoomba woodworkers club… Get...

Read this entry »


View degoose's profile

Open weave Lazy Larry #1: Ripping the stock.

07-14-2011 11:28 AM by degoose | 12 comments »

I am about to make an open weave Lazy Larry…similar to this one. I have ripped some Tasmanian Blackwood into the required strips….. these are just over 600 mm long and 50 mm by 20 mm For our American cousins… 2 feet long and 2 inch by 3/4 inch.. Tomorrow I will be ripping some thin stripes of Huon Pine and Tasmanian Blackwood to make the accents… Strips will be only 3 mm thick [ 1/8 inch] The background will be Huon Pine….. cut into 50 mm squares̷...

Read this entry »


View degoose's profile

Inspiration.

06-07-2011 09:35 AM by degoose | 14 comments »

You have met Col and Ken, but the most talented bloke I know in the area is my good mate Kev from FatBoy Furniture… I ran into Kev at the local inspirational centre… 1st Choice bottle-o…. where we were looking for inspiration to take home. He makes the most fantastic solid outdoor furniture… makes it from Iron Bark… very hard timber but today he had a few lazy susans in the boot of his car and offered to show me… I jumped at a chance to see more of h...

Read this entry »


View degoose's profile

Circle cutting #8: Fitting the Lazy Larry Bearing

03-13-2010 07:26 AM by degoose | 12 comments »

I know I have posted this before but it is now on video and for those of you who are not subscribed to my bloghere it is…..

Read this entry »


View dustbunny's profile

All in One Jig Part 1 #1: Diamonds and Triangles

10-02-2009 03:28 AM by dustbunny | 43 comments »

After posting the quilted lazy susan project, http://lumberjocks.com/projects/21623, many of you said you would like to see the jig for this project. I set out immediately to upgrade the jig. There were cuts I wanted to incorporate into this jig, and my original was warping and needed repair anyway. So here it is – 24” X 33” I am pretty proud of this jig, not only because I made it, but because the cuts made from this jig are right on the money. The first ...

Read this entry »


View Gary Fixler's profile

001: maple lazy susan #1: everything up to, but not including the finishing work

02-22-2009 04:07 PM by Gary Fixler | 6 comments »

This is a very simple one. I was hired by our office manager to slap together a lazy susan in maple, to match the cabinets at work in the kitchen. It’s going to hold coffee cans, filters, spoons, and other coffee-time trappings. It can’t get much simpler. I biscuit joined 5 17” lengths of jointed 1×4 maple from the same 8’ plank, making a roughly 17” square, cut out a 16”+ circle, sanded it up and routed the edge to clean it up to a more perfect 16&...

Read this entry »


View Grumpy's profile

Lazy Susan

12-05-2008 05:01 AM by Grumpy | 15 comments »

This project had more hickups than an old drunk in the park but thanks to three of my buddies who gave some excellent advice I was able to straighten (I do mean straighten) things out. Our Kitchen table is an 8 seater. Reaching items in the middle was a bit of a nuisance unless you stood up. A lazy Susan was the answer, but what size?.I drew the whole thing on sketchup but that did not give a satisfactory idea of proportion. I then cut two 8mm (5/16”) plywood templates, a 500mm & 60...

Read this entry »


View WoodMosaics's profile

Piece Size – Critical – and - Not Critical

10-16-2008 06:28 PM by WoodMosaics | 4 comments »

The size doesn’t really mater, they just have to all be the same AND they have to match up with the triangle and any pieces of another size you may use along with them. The reason I go with .734 or 47/64” is some of the boards I was getting were just under ¾”. I cut the strips off the edge of a board and from those strips, I cut my pieces, so I want to be able to then get the strip to the right width, and if it starts out to narrow, I can’t. Now when I use the half size pieces with the re...

Read this entry »


View WoodMosaics's profile

How I Make a Lazy Susan

10-01-2008 05:36 PM by WoodMosaics | 33 comments »

Now before I get started on this little demonstration of how I do it, let me caution you on a couple things. IF you try anything like this, take the plate that your saw blade comes up through and close that hole completely up with a thin piece of wood. Make sure it is even with the top, with no gaps and no lips to catch the pieces. You want it smooth. Then with a “Hollow ground plywood blade” come up from the bottom so you have no gap between the blade and the wood. You may have to do this a ...

Read this entry »


« prev 1 2
19 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com