LumberJocks

Woodworking blog entries tagged with 'layout blind'

  • Advertise with us
View DustyMark's profile

Building the "Swiss Army Knife" of Small Boats...Wood Duck Double #51: Blind Body: Boat Prep

08-25-2020 01:46 AM by DustyMark | 2 comments »

Backing PlatesI fabricated backing plates from 1/8” aluminum for use under the bimini mounts. I didn’t want those #10 washers pulling through the deck when I flip open a wet door! I also cut all the bolt ends flush under the deck with my Fein oscillating sander and the bimetal blade attachment. Clevis Pin Tethers I used 1/16” braided stainless cable to tether the clevis pins to the blind frame. Each tether is riveted to the frame. BucklesThe lower edge of t...

Read this entry »


View DustyMark's profile

Building the "Swiss Army Knife" of Small Boats...Wood Duck Double #50: Duck Blind Frame: Doors

08-22-2020 09:33 PM by DustyMark | 0 comments »

Complicated BendsBending the doors always kicks my butt. I used both ends of my conduit practice piece before I moved on to aluminum tubing. I’m laying pretty low in these pictures. There’s room for me to raise the seat up one incline notch. Once you get all your gear on, the extra room gets used up. I hate being crowded under the doors. I don’t need a framed face shield. A soft shroud attached at the roof of the blind will work just fine. I’ll part...

Read this entry »


View DustyMark's profile

Building a KARA Hummer Layout Duck Boat #23: Sewing the Flip Blind Doors

09-15-2015 03:59 AM by DustyMark | 0 comments »

Overview With all the framework complete for the flip blind doors, it was time to sew Cordura nylon to the frames. I made the plunge and bought a heavy duty sewing machine that I’d considered for many years. This is the Sailrite Ultrafeed LSZ-1 sewing machine. I considered this a major tool purchase and it will definitely make it easier to outfit these three layout boats. Here's a link to Sailrite Kits for more information on the machine. Material Selection We chose 1...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com