LumberJocks

Woodworking blog entries tagged with 'lathe jigs'

  • Advertise with us
View htl's profile

Shop Smith #8: Building Izzy's Lathe, Router Duplicator.

04-29-2016 12:09 AM by htl | 5 comments »

The more I thought about it I realized I wasn’t going to be able to stand over the Shop Smith to turn the parts for my train engine so was on the look out for an option.I don’t know how or why but Izzy’s video about making Lathe Router Duplicator [LRD] came up and the gears started turning.Here’s his blog on it.http://lumberjocks.com/projects/89782#comment-3140930 Needing to use the lathe to build a Toys and Joys train engine but I don’t have any lathe tools a...

Read this entry »


View Luke's profile

Chess pieces and board #3: Finishing Off Lathe

02-12-2014 04:59 PM by Luke | 0 comments »

I usually just finish the chess pieces one at a time. I wanted to be able to get a good smooth finish on them like you do on the lathe but still be able to turn another piece without having to wait for them to dry in between coats.This is what I came up with. I drilled a 1/4” hole into 3/4” dowel and inserted a 1/4” dowel to chuck in the drill. I drilled a 3/4” hole in the holder and used a round file to ream it out so there is enough play to let it spin freely. After ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com