Woodworking blog entries tagged with 'korina'

  • Advertise with us
View Steve's profile

White Limba / Korina - Using single piece for Explorer Guitar Builds

06-13-2019 01:35 PM by Steve | 0 comments »

View on YouTube

Read this entry »

View Dave G's profile

Klein Solid Body Electric Travel Guitar #6: Glue Up

09-23-2015 11:12 PM by Dave G | 0 comments »

I drilled and chopped out the wire passages for the pickups then glued the beast to the neck with Titebond III.Wire routes. It will weigh about 7#.I should be able to trim some weight as I shape it. Before gluing I cutout the body at the bandsaw with a 1/4” blade. I used the scrap as caul and I also had to put some tape on the top of the body to level it with the neck. The glue-up was done face down on a board and tapped into into alignment against the board while tightening th...

Read this entry »

View Dave G's profile

Klein Solid Body Electric Travel Guitar #5: Bookmatched Body Blanks and Fret Marks

09-07-2015 11:24 PM by Dave G | 0 comments »

I took two pieces of Black Limba and resawed them to make bookmatched body halves. I glued the back sides and ended up with two different books to choose from. I picked my favorite. Below you can see the intended result. The pieces of paper illustrate what I’ll cut out of each blank. I also put little plastic fret markers into the binding/ebony edge on top only. No fretboard dots. I learned that ABS does not like heating by the drill bit! Use slow speed only and be quick ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics