LumberJocks

Woodworking blog entries tagged with 'k body'

  • Advertise with us
View Gary Fixler's profile

004: cheap, rolling lathe stand #3: drawers from scrap material

01-30-2010 11:25 PM by Gary Fixler | 5 comments »

In keeping with the “don’t spend anything” ethic of this piece, I found some scrap 1/2” boards. Two were longer scraps of baltic birch ply, but there was only enough with the long grain for the 2 sides of each drawer. I had a stack of scraps of the same stuff but with the grain running across the width, so I cut 2 of those down for the backs. The fronts I made from scrap 1/2” construction grade ply. The drawer fronts would cover those up. The bottoms are 1/8̶...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com