LumberJocks

Woodworking blog entries tagged with 'jig'

  • Advertise with us
View coloradoclimber's profile

Another mixed bag from Grizzly

06-23-2007 03:57 AM by coloradoclimber | 32 comments »

Well I did it again, I ordered from Grizzly and got what I should have expected. I’ve been wanting a tenoning jig, I read some reviews, Grizzly is rated a good value, generally as functional as any other brands. I looked at the pictures of the grizzly and others and decided the grizzly looked just as good and was substantially less money. I’ll be reviewing the tenoning jig in another thread but for now here’s a short intro to other stuff I found in the box. I ordered...

Read this entry »


View USCJeff's profile

Morgan's Jewelry Box #2: Half-Blind joints Pics (The Good and the Bad!)

05-23-2007 04:47 PM by USCJeff | 5 comments »

Here are the Half-Blind joints I was commenting on in my prior entry. Here is the first one I did. I did it without tweaking the jig. As you can see, there was a consistent gap. The tails didn’t quite fit in snuggly. I made a slight tweak of the depth, and got a much better result: As you can see, I am creating a pine prototype as I go. I still make a lot of errors as a newbie and don't want to ruin the Walnut if I can help it.

Read this entry »


View David's profile

Quarter Size Cherry Quilt Chests #3: Leigh FMT Jig - Part 2

05-16-2007 09:38 AM by David | 8 comments »

Well, this is the second of the LEIGH FMT Jig videos. Again please excuse the ameteur quality. This is just my way of sharing a fun day in the shop while pushing my digital envelope, so to say. Things have been a bit hectic here so it was good to get some dedicated time in the shop. Many thanks to my wife for allowing this indulgance! I thought a video post would be fun to explore since I have learned so much from my fellow woodworkers via digital imagery. I am not sure what I am going to ...

Read this entry »


View fred's profile

Thorsen Side Table #4: Finally, Glue Up. Making the pegs.

05-14-2007 08:49 PM by fred | 5 comments »

I finally finished the design work for the table aprons. Nothing quite spectacular but my own touch and interpretation has been added. No pics yet since my daughter has not returned from England with my camera. She should be back Sunday night. So pics will have to wait until next week. Nothing like waiting until the last minute. It is starting to look like a table. Saturday I glued up the table ends and stretchers. Sunday I glued up the back and front with the small shelf between the...

Read this entry »


View Jeff's profile

Closet Rebuild #1: Shelf Pin Jig

05-10-2007 06:37 AM by Jeff | 5 comments »

As part of the revamp of the closet in our loft that collapsed a few moths ago, I built this jig to ensure all the holes for the shelf pins would line up and I (hopefully) won’t have any wobbly shelves. It was inspired by a jig sold by one of the well-known woodworking retailers. I couldn’t see buying one when I had all the necessary stuff sitting around (short of a special bit). In hind sight, the time spent might justify the cost. What can I say? I like building jigs. All the...

Read this entry »


View Karson's profile

Thorsen Side by Side LJ / PW Challenge Karson #4: A jig I made for use in the Thorsen table

05-09-2007 03:30 AM by Karson | 6 comments »

I wanted to show the jig that I used for making the Thorsen Greene & Greene table Aprons. The plans in Popular Woodworking had a cutout on each of the aprons. Different patterns on the sides and the front and back. I took the plans and printed them on my printer but each of the boxes were suppose to be 1” square and they were small. So I took the printout to Staples and had them copy them at 125% increase. I ended up with 1” squares. I then glued the paper on some ½” particle board ...

Read this entry »


View gizmodyne's profile

Cabinet Progress #8: The fir was flying.

04-29-2007 06:10 AM by gizmodyne | 24 comments »

Building BoxesWe started to get stressed about completing both cabinets in the next two weeks in time for the first annual wood competition at our school. So we made the decision to complete one cabinet. Today we started to build the drawers. Our drawers will be dovetailed in the front and dadoed in the back. They will receive another nicer drawer front. Step One. Cutting out the knots. Step Two. Resawing.We were able to get two 1/2” thick pieces out of each board. Step Thre...

Read this entry »


View gizmodyne's profile

Cabinet Progress #5: Video Blog: Biscuit Boy

04-02-2007 08:17 AM by gizmodyne | 11 comments »

Making Big BoxesToday’s task: Get joining; the cabinets are to be held together with biscuits. Each cabinet has 30 slots. So I needed to get organized to save a lot of marking time and avoid mistakes. Gettin Jiggy(Alright I used that “joke” twice. Sorry).I started by building a jig to hold the rails along with several storyboards/ spacers to get the biscuits just right. I just mark the spacer and cut directly from that rather than mark each cabinet side. All of the parts ...

Read this entry »


« prev 1 ... 32 33 34 35
348 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com