LumberJocks

Woodworking blog entries tagged with 'inverted'

  • Advertise with us
View PurpLev's profile

Techniques & Methods #2: Fixing Messed-up Blind Dovetails

08-04-2009 05:50 AM by PurpLev | 16 comments »

As I mentioned in my recent workbench blog, I had used inverted dovetail joinery to connect the skirt of the benchtop to the endcap. just like Arabian Nights, there are 1001 stories why joinery can get screwed up- mine were rushing + miscalculating + lack of experience + other. All of these matter not, and the end result is a misaligned, crooked, awfully looking, and unacceptable dovetail fit: you can plainly see the tearout and large gaps between the mating parts, and the misalignment on ...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #13: The Top #3: Putting it Together with an Inverted Dovetail

08-02-2009 10:56 PM by PurpLev | 14 comments »

Didn’t have much shoptime lately, which made me try to squeeze every moment I got to try and make the most of it, which lead to rushing, which lead to screw up – but I’ll write more about that in a following installment and leave this one a bit more on the positive side. Last time I ran into the issue of having a not-square top part to work with. I fixed that by routing the edge at a 0.1 degree angle to straighten the front of the slab and make it parallel to the front 2 ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com