LumberJocks

Woodworking blog entries tagged with 'incra'

  • Advertise with us
View SWM's profile

Incra Offset Router Table #3: Doors, Drawers, & Other Details

09-27-2010 03:30 AM by SWM | 1 comment »

This project has really turned into a labor of love. Although, my work is far from what I’d consider craftsman level, I can tell that boxes are getting more square and my work more precise. What else can you ask for right? What better first project for a new router table and fence than to build it’s doors and drawers. The unit has 4 drawers on the right side: 4”, 5.5”, 6”, 9”. The bottom left drawer is 12”. No real science to the apportionment, ...

Read this entry »


View PurpLev's profile

Router Table #1: Design ideas, need some feedback

02-18-2009 09:44 PM by PurpLev | 43 comments »

OK, so yeah – another blog about a router table, but since I’m going to make one , might as well document it while I go, maybe someone can benefit from this. I’ve had a Rockler router table top + plate + fence which I got when I bought my router (Bosch 2 1/4hp). It had the misfurtune of being on the floor when my basement was flooded a couple of years ago, so that top was ruined. I since have been planning to replace it with a shop-built version, and make a full enclosed ...

Read this entry »


View JL7's profile

The Basement #7: New Incra Router Table

11-27-2010 12:09 AM by JL7 | 6 comments »

I finally got the materials together to build a decent router table. I have had the Incra Ultra Jig around for awhile now, and have used it on some of my previous router tables, but my homemade tops were always off just a little. Always seem to have trouble getting the router plates to sit just right in the opening, etc. This time I bit the bullet and bought Woodpeckers 27×43 offset table along with the PRL V2 lift (very sweet!). I acquired the extruded aluminum pieces from some di...

Read this entry »


View David's profile

Crosscut Sled

01-22-2009 08:13 AM by David | 19 comments »

This video features a new crosscut sled built for my shop. Inspiration for this sled came form books in my library and countless Internet searches. This is a simple project for the shop that will increase safety, speed and accuracy of crosscuts on the table saw. Construction is simple with a MDF base, maple fences, Incra Miter Bars and T-Track. The plan file is available for download. Hopefully this will inspire a sled for your shop! David STOP BLOCK DETAIL FRONT FENCE DETAIL

Read this entry »


View SPHinTampa's profile

Incra Double Dovetail Project #1: Prep Work - creating the laminated stock

10-05-2011 11:32 PM by SPHinTampa | 4 comments »

I have gotten a few questions (actually 3) from folk about to how create the Incra Double Dovetails Joints such as the one in this project: I will not be making a box in this blog. But a really good friend saw this box and asked if I could make a 14” x 19” serving tray in the same style. Maureen has been a huge help to my wife and I so I was happy to get a chance to make something for her. Obviously, first place to start is to get an Incra Jig System. I have the old 1...

Read this entry »


View Blake's profile

My New Router Table #1: First Go at Sketchup, what a cool program!

11-04-2007 07:44 PM by Blake | 13 comments »

I have always liked CAD programs but have used them very little. I was an engineering major for a short time in college and took a few technical drawing classes, which I loved. I always thought it would be neat to own some sort of CAD program but never bought one. I think it is great that Google now offers one for free! I had never heard of Sketchup before I found LumberJocks. Anyway, I am building a new router table for my Incra fence+positioner, so I thought I would give it a go. The pro...

Read this entry »


View PurpLev's profile

Router Table #8: Insert an Insert an Insert an Insert an....

01-11-2010 01:08 AM by PurpLev | 15 comments »

OK. I caved in and bought an Incra Insert for the router table after they posted it back in stock. It’s the 3/8” phenolic plate that is their ‘old’ design. the opening for the router is 3 3/8” as opposed to the new Aluminum plate which are 3 5/8”. also it’s not as mechanical capable as the aluminum plates, but for $35 it’s within my budget. and still a very good plate. what I really like about the Incras is their MagnaLock plate inserts which sn...

Read this entry »


View SPHinTampa's profile

Incra Double Dovetail Project #2: Cutting the side joints

10-07-2011 04:07 PM by SPHinTampa | 3 comments »

First step of a double dovetail is to cut a through dovetail on each side piece and then attach a trim piece. This blog entry will cover that process. So starting with the end pieces and a 6” piece of trim stock (same width as the side piece, thickness doesn’t matter). Install the two template strips into the positioning system (1 dovetail strip and 1 double dovetail strip). The dovetail strip consists of an A side which lets you cut pins at 7/8” intervals and ...

Read this entry »


View Blake's profile

My New Router Table #3: Finishing Cabinet Assembly and Dust Collection

11-07-2007 09:09 PM by Blake | 14 comments »

This project is really coming together. That biscuit jointer really makes quick and easy work of cabinet assembly. I have never really gotten a chance to use it before. I ordered an Incra Magni-Lock router plate through Woodcraft. It seems to be on the slow boat. But hopefully it will come at about the time I need it. Anyway, more chronicles of the progress I made on my day off yesterday: Here is the cabinet fascia with half lap joinery, 3/4” x 2” Beechwood (the most inex...

Read this entry »


View StumpyNubs's profile

The Stumpy Nubs Workshop #28: Our homemade router lift sure beats bending over, and Randy touches poo!

10-31-2012 07:45 PM by StumpyNubs | 25 comments »

The “great particle board build off” that’s captivated the woodworking world is progressing nicely, but Stumpy takes some time off to make a router lift that just might save the universe! Then he chisels away at the confusion surrounding what types of tools people should own, does a tool review, and gets Randy to touch dog poo. That and a lot more on the new, exciting, action packed and informative episode of Blue Collar Woodworking! After you watch this one, visit St...

Read this entry »


1 2 3 4 ... 7 next »
67 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com