LumberJocks

Woodworking blog entries tagged with 'handmade'

  • Advertise with us
View LastingBuild's profile

How to dimension lumber with handtools #1: Tools

09-10-2018 01:38 AM by LastingBuild | 0 comments »

I started a new video series tonight on how to dimension lumber using only hand tools. I am currently woking on building a treadle lathe and have been busy dimensioning all the components for the project. The tools I am currently using are the Stanley Sweetheart #4, Stanley #62 low angle jack plane, Stanley Bailey #7, A square, Stanley marking knife, Wood river marking gauge and 3 foot long measuring stick. It is a little slow but a good work-out. My shaving pile his about a foot tall now. ...

Read this entry »


View LastingBuild's profile

Treadle Lathe #1: Part I: Introduction

08-31-2018 11:56 AM by LastingBuild | 2 comments »

I am excited to build a treadle lathe. I recently began milling some rough sawn oak to use as the frame and I have assembled the needed hardware to make a functional lathe. I am using multiple sources in this project as reference material. I have listed the reference material below.: How to build a treadle Lathe by Steve Schmeck Lathe from a Loft by Roy Underhill Treadle Lathe by Mr. Chicadee on youtube. The hardware needed for this project is: 1/2” steel Rod...

Read this entry »


View WoodenWorldDenic's profile

How I made #5: Wooden business card holder

07-31-2018 07:51 AM by WoodenWorldDenic | 2 comments »

I used various types of light and dark wood to create a business card holder: walnut, cherry, oak and thermally processed ash. In later versions, I improved my basic design a little, I reduced the lock and made it easier to take cards from the box with one hand. Here is video: Making a Wooden business card holder

Read this entry »


View DustyNewt's profile

How I Carve a 2-Liner Keychain

06-28-2018 12:17 PM by DustyNewt | 3 comments »

This shows my methodology for carving one of my 2-Liner keychains. I have carved thousands of these for a wonderful customer to resell, and still have all my digits…(knock on wood). View on YouTube

Read this entry »


View A Slice of Wood Workshop's profile

Making Moulding by Hand!

03-14-2017 12:41 AM by A Slice of Wood Workshop | 4 comments »

In my adventure to building a bookcase, I took it upon myself to make the base moulding as well as the moulding to go around the top. Check it out and let me know what you think. Like and subscribe for more blacksmithing and woodworking videos!

Read this entry »


View joedillon's profile

My Roubo Workbench. #4: part 4 Leg to benchtop joints.

01-02-2016 03:12 PM by joedillon | 3 comments »

At this point of the build I had a big decision to make, the original Roubo design details a through mortice and Tenon and sliding dovetail. Although I’m a carpenter I haven’t marked out a Tenon let alone a dovetail in over 20 years. My confidence in my joint cutting skills didn’t match my aspirations in keeping to the original design.I chickened out and decided that a single beefy mortice and tenon would do.Using a mortice gauge I acuarately marked the tenons in eac...

Read this entry »


View joedillon's profile

My Roubo Workbench. #2: Part 2 Milling up the material.

01-01-2016 04:58 PM by joedillon | 2 comments »

I’m a carpenter, I fit out kitchens, offices, cafes for a specialist joinery firm that runs a modest workshop.By chance they had overordered a batch of Spruce pine and had no immediate use for it.After a brief chat with the boss and workshop manager, 7 of those boards were wheeled to a massive table saw, the legs, stretchers and top were cut to an oversize dimension and length, then surface planed and edged and then thicknessed.My intention was to hand build this bench over the Chri...

Read this entry »


View A Slice of Wood Workshop's profile

Handmade Key Rack with Hand Forged Hooks

02-22-2015 08:47 PM by A Slice of Wood Workshop | 1 comment »

Create your own key rack so you never lose those keys again. If you don’t have a forge to heat up your metal hooks, you can use a propane torch.

Read this entry »


View Walther von Einik's profile

AGING OF SURFACE #6: Country Style Rustic Mailbox With Metal Forging. Process Of Making

08-18-2013 12:31 AM by Walther von Einik | 3 comments »

Here is the process of Country Style Rustic Mailbox making. Only natural and new matherials were used. Handmad aging, handmade metal forging. Special made rust. It’s a collective image made from different old mailboxes.It was a special order – and my customer was very happy when she recived it. Here is her review : ” Residential mailbox by * Aug 16th 2013WOW!!!! Is the words to describe this!!!!!! He is AMAZINGLY TALENTED!!!!! He described every detail & step along the...

Read this entry »


View Byron's profile

Random #3: Please vote!! Bonsai Bench

05-05-2013 03:11 PM by Byron | 16 comments »

I need your support! Please vote on http://www.powermaticstudentvote.com/entries/byron-conn/. This Bench will be featured this year at ICFF in the Furniture Society and Powermatic’s booth. The 12 students selected have been entered in a competition to win a bandsaw. So, if you like this piece or my work please support me by casting your vote!! You can vote every 4 hours until May 20th! Voting does require your email but I have not received a message from them yet. You can see more of my wo...

Read this entry »


« prev 1 2 3 4 next »
35 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com