LumberJocks

Woodworking blog entries tagged with 'hand tool woodworking'

  • Advertise with us
View wrenchhead's profile

Building a Corner Cabinet From Magazine Plans

12-12-2018 01:15 AM by wrenchhead | 1 comment »

I built this corner cabinet out of curly maple. I built this project by following an article in the November 2010 issue (No. 186)of Popular Woodworking Magazine. I really love this design and this is the second one of these style cupboards i have built over the years. I mostly followed the plans in the article but I did make some changes, incorporating a beginner blacksmith project in to the cabinet. I forged these simple J hooks at the anvil for the piece and am I’m really happy with h...

Read this entry »


View wrenchhead's profile

Moxon Vise Build

09-28-2018 12:31 AM by wrenchhead | 3 comments »

I made this Moxon vise to bring my work up to a comfortable height when laying out and cutting dovetails and other joinery. The vise is 24 inches between the screws so I can clamp wide boards. The vise has really good clamping pressure and like all the Benchcrafted hardware I have seen, everything operates smooth and fast. Thanks for watching! https://www.youtube.com/watch?v=7vBXvlP4bEs

Read this entry »


View WoodWorkLIFE's profile

Handtool Basics #3: Restoring the American Bedrock...Plane that is - Restoring Stanley Bedrock 604c and 605

04-02-2017 03:12 AM by WoodWorkLIFE | 0 comments »

I have restored several planes in my pursuit of finding the right tool in hand tool woodworking. I have done several Stanleys of various vintage and quality, off brands, and long dead brands that change hands around the US. I have met the odd fellow in a parking lot to look at a few planes in a trunk and make him an offer he can’t refuse. I have not however had the joy, nay, privileged of restoring a Stanley Bedrock plane. Whelp, that changes now. I got my hands on a couple of old ...

Read this entry »


View StumpyNubs's profile

Old-Timey Woodworking #2: Almost all you ever wanted to know about making and using marking gauges!

07-08-2013 07:47 PM by StumpyNubs | 12 comments »

The second episode of our new hand tool woodworking show is all about one of the most essential tools for the old-timey woodworker: The marking gauge! In fact Stumpy applies his woodworking wit and wisdom to three types of gauges, building a marking gauge, a mortise gauge, and a cutting gauge; all three with just a few hardwood scraps and a little bench time. At the end you’ll have a deeper understanding of this critical tool, not to mention three of them to call your own! The Ol...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com