LumberJocks

Woodworking blog entries tagged with 'grinder'

  • Advertise with us
View PASs's profile

Tools #3: Grinding and polishing station

03-18-2014 12:19 AM by PASs | 3 comments »

I have a thing for filing cabinets. I have 19 (nineteen) in my shop.I get them for free or dirt cheap off Craig’s List. And they are all high quality (Hon or equivalent.)A couple weeks ago I decided to consolidate my two grinders on separate stations into one master station.My main grinder was set on a rolling tool stand. It has the lathe sharpening setup underneath. The second grinder is a cheapo for general purpose grinding. The goal was to mount them back-to-back in the (futile...

Read this entry »


View Tim & Candy Hicks's profile

Twisted Coffee Table Base #2: Leveling & Cleaning Juniper Coffee Table Base

01-11-2009 10:16 PM by Tim & Candy Hicks | 1 comment »

Here my husband is leveling the bottom so we can start getting it down to the right height. My daughter Scooter helping clean the bark out of the crevices

Read this entry »


View Kelly's profile

Grinder and Beltsander Setup Gauges

02-14-2018 06:59 AM by Kelly | 3 comments »

When you sharpen your own chisels and wood turning knives, you’ll find it necessary to set your grinder or sander support table to different angles for different tools. Of course, you’ll find it necessary to repeat the previously set angle, to avoid removing valuable steel from the tools, and to get consistent cuts. Setting up a tool rest of a grinder or belt sander to grind a specific angle presents a challenge because you can’t use triangle templates (see first photo), angl...

Read this entry »


View NedB's profile

Tool thoughts #13: Wolvie Clone in progress

11-02-2008 03:16 AM by NedB | 5 comments »

With my shop mostly completed, I have turned towards getting my tools in order, including setting my grinder for sharpening my turning tools. I found this plan online and decided that it would be easy enough to build instead of shelling out $90 for the wolverine jig itself. I still have to mount the grinder to the platform at the proper height, as well as recut the v-block. The one there isn’t cut evenly, so I’m going to cut another piece on the tablesaw instead of the bands...

Read this entry »


View Dutchy's profile

My shop #3: Is my shop to small or do I have to many tools?

02-08-2015 03:34 PM by Dutchy | 10 comments »

Is my shop to small or do I have to many tools? It,s up to you. For the small machines I have thought making flipover stands, but on one stand I could put two, maybe three, machines on it. After thinking and trying I came to a solution and put five machines on a small bench. I can use all five without a lot of change. Overvieuw: Drawers for drills and so on: Drill table hanging on the left side: Drill press with mounted table: On the back a flexible drilling shaft and also p...

Read this entry »


View WoodWorkLIFE's profile

My YouTube Channel Just Hit 10k Subscribers

11-17-2017 08:40 PM by WoodWorkLIFE | 0 comments »

Hey guys, It has been a lot of fun posting my projects and videos here as my channel has grown. Since the Lumbejocks community has been there right alongside me this whole way I figured I would let you in on the HUGE GIVEAWAY I have going on coinciding with my YouTube Channel hitting 10,000 subscribers. Anyway check out the video for the details and be sure to get subscribed so you can win some awesome stuff. I managed to scrounge together a pretty sweet little setup: A PPE from RZ M...

Read this entry »


View Tim & Candy Hicks's profile

Juniper Log Furniture : Floor Lamp #3: Scribing / Shaping

05-26-2009 08:24 PM by Tim & Candy Hicks | 4 comments »

Okay here is one of the most tedious parts of this lamp. Here are pictures of how the lamp limb looked before we started shaping it to the base. There are several types of scribing tools available, but we have not been able to find one that works for us. To start the process, we find the point where the limb is the higest from the base. This is our starting point for the line that we draw to start shaping. We use a pencil compass for our scribing lines. The line has to stay level / perpe...

Read this entry »


View Brandon 's profile

Part 1: Tear apart, clean up, and sand prime and start paint on shell

01-25-2019 02:21 PM by Brandon | 1 comment »

I found this old Manning Bowman 4 1/2” bench grinder on Facebook marketplace. Guy was asking $30, we made a deal for $20. I really like the looks of it, and it works, and it’s small, so it wont take up much real estate in the shop. Right after I picked it up, I swung by old reliable HF for some parts and such. I picked up a new grinding wheel, a 6” (all they had) polishing wheel that I’m gonna have to cut down to 4 1/2” and a “sander base?” looking thing that I thought...

Read this entry »


View bandit571's profile (online now)

Mitre Box, a rehab story #3: New wheel, still soaking

08-05-2019 11:35 PM by bandit571 | 2 comments »

New wheel was installed, and put to work.. PITA to change out. Plastic tub for parts was brought down to the shop.. got the stock rests all cleaned up, and shiny…which left two pointy screws to do.. Called stock holders, they have a pointy end, that will grip a board into place, while you saw away..Into the tub these go. The 2 catches from the tops of the guide assemblies, are cleaned up, and re-installed, they also have a patent date stamped into them “10-5-09”...

Read this entry »


« prev 1 2 3
29 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com