LumberJocks

Woodworking blog entries tagged with 'glue'

  • Advertise with us
View sras's profile

Mahogany Kitchen Stool Project #16: Assembling 6 stools with pre-finished parts

07-28-2012 07:10 PM by sras | 10 comments »

After I got the parts all finished, I was really excited to do a dry fit and see how everything looked. I didn’t even bother to change into any shop clothes! As you can see, tongue position is important when dry fitting pre-finished parts. Before I actually glued up an assembly, I dry fit the stool. The corner blocks are then set in place. The tenons on the corner blocks needed a little fitting to get them into position. Pilot holes for the screws were drilled and then the sto...

Read this entry »


View bigchopperoo's profile

Keep it Square

08-30-2012 10:49 AM by bigchopperoo | 4 comments »

Here’s a great tip on using up those scrap pieces of plywood. If you like this video, we have new ones every Thurdays on our youtube channel.

Read this entry »


View moshel's profile

Jig for gluing hexagons

09-18-2010 01:27 PM by moshel | 8 comments »

I had several requests to make more of my hexagonal tumbling blocks coaster. they are pretty streightworward to make other than the glue up procedure. the parts slide, crawl, jump and move…. so, i decided to make a jig: to make it, you will need:base board (mdf or plywood, 3/4” works best)piece of mdf, slightly wider than your hexagon1 bolt start by gluing the offcuts from cutting the parts of the hexagon so they make the “press” from both sides.make sure you ...

Read this entry »


View Tim Dorcas's profile

My Maloof Rocker #3: Mixing the Urea Resin Glue

07-04-2011 08:04 PM by Tim Dorcas | 3 comments »

In this clip Randy Child shows us how he mixes Urea Resin Glue to get the correct consistency. This step is in preparation for gluing up the rockers.

Read this entry »


View PurpLev's profile

Machinist Toolcart #4: Gluing up the Carcass

06-22-2011 04:03 PM by PurpLev | 8 comments »

Had another quick chance for some shop time and used that to glue together the fitted carcass. I didn’t want to deal with the glueup the day before (after fitting the dividers) as I knew I would need a peace of mind and ample time to do the glueup properly and not rush through it. And so, I cleared the workbench from all the ‘things’ that always seem to end up on it (how is that always happening?!?) to have use of it’s full length (barely enough) and laid down the c...

Read this entry »


View Lee A. Jesberger's profile

Veneering #1: A Primer Course

07-12-2007 06:35 AM by Lee A. Jesberger | 19 comments »

Veneering, a Primer Course The top photo is a couple sample packs of sequenced matched veneers from Woodcraft supply.The secong photo is bookmatched Camphor veneer.The third photo is Bruce holding a sample of Avodire Crotch veneer, with No Finish on it. Some of you may have noticed my slight addiction to working with veneers. When you start to investigate the available veneers on the market, it becomes very difficult for me to understand the resistance to it that some people have....

Read this entry »


View retired_guru's profile

Woodworking on a Half-Shoestring #2: Dollar Store Glue Applicators

09-21-2014 06:53 PM by retired_guru | 16 comments »

A short time ago I found a tip on the Web that I had to follow-up on. Rockler sells a silicone bristled glue applicator brush for $4.99: When the white/yellow glue dries on the bristles, it peels and flakes off with little resistance. Nice. Buy the brush once and you won’t have to replace it any time soon. This tip I found was even better. Your local dollar store sells silicone basters for the kitchen for a fifth of the price of Rockler’s offering. Here’s what I pi...

Read this entry »


View GlassImpressions's profile

PVC Dust Collection Blast Gate - self cleaning design with a detent feature

02-17-2015 05:23 PM by GlassImpressions | 3 comments »

I filmed the build on my YouTube Channel. Please check it out! Please like, share, and if you enjoyed the video subscribe! http://youtu.be/ACLFMAfV1fk I recently added a Clearvue Cyclone dust collector to my shop. I plumbed it completely with 6” and 4” PVC piping. I needed a way to close off each branch to maximize the performance of the dust collector. Commercially available plastic blast gates are way to cheap and clog easily. The metal blast gates that solve this issue are p...

Read this entry »


View Donna Menke's profile

Inside-Out Ornament Tutorial #1: How to Make an Inside-Out Ornament

01-10-2012 12:32 AM by Donna Menke | 6 comments »

I have wanted to try to make one of these ornaments ever since I first saw them. They are so interesting, and everyone asks- “how did you do that”? I had trouble understanding a lot of the how-to descriptions, and even the videos were hard to follow. I found this one tutorial that I thought was good, and after about the 10th read-through I thought I’d grasped the concept.” http://www.ptwoodturners.org/Tips%20and%20Handouts/INSIDE-OUT.pdfOne of the first things I did wa...

Read this entry »


View clieb91's profile

Cheap Tricks #1: Glue Spreaders

05-31-2010 07:29 PM by clieb91 | 13 comments »

So I know everyone out there has some of their own money saving tips and tricks. I thought I would try to share a few of the ones I use. This idea came to me today while wandering around one of my favorite stores, trying to find items to put in my discount shopping bag. I saw a package of plastic glue spreaders for sale for $3.50 (per 6), I have read of guys using old credit cards and such and I have a few of them in my box but the items I found that seems to work well serves two purposes ...

Read this entry »


« prev 1 2 3 4 5 6 ... 10 next »
97 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com