Woodworking blog entries tagged with 'frame and panel doors'

  • Advertise with us
View oldguy2's profile

3 pc.bookcase cabinet series #11: Raised Panel Door labor of love, 5 to go

12-18-2020 09:19 PM by oldguy2 | 2 comments »

And after many reasons for delays, I completed the 6 poplar panels slightly oversized. Checked the frames. notice each frame is a bridle joint with tongue and groove joint and a notch in the corner for the panel. I used a table saw for the tenons and groove since this poplar proved so hard on my router bits. Each frame was labeled and corners labeled. I have a vertical panel raising bit and you increment the fence back after a pass to get the depth you want. ...

Read this entry »

View Tooch's profile

Dual Miter Saw station #6: Making/attaching the doors

11-11-2016 09:48 PM by Tooch | 3 comments »

After finishing the face frame, I knew it was time to build some doors to make the station look a little more complete and also keep dust out. Because of the shop vacs, the plan is to only build 5 doors, that way there will still be enough airflowfor the vacuum to work properly. The first step was to route a bunch of pieces for the frame. When cutting a bunch of pieces that need to be the same measurements, I find it’s easiest to stack them up and cut all at once. Afte...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics