LumberJocks

Woodworking blog entries tagged with 'endtable'

  • Advertise with us
View degoose's profile

Building something for MY house. #2: The glue up

05-04-2012 12:02 AM by degoose | 13 comments »

Bit of a bugger getting all these pieces in place, clamping and making sure it is all square… Half way there… Why you need lots of clamps…and this is really only a small glue up… A close up of the grate… note there are a few gaps… hey this was a first for me…

Read this entry »


View CaptainSkully's profile

Arts & Crafts Night Stands #3: Some Assembly Required...

08-26-2009 09:22 AM by CaptainSkully | 4 comments »

Today, I took the rough parts and managed to achieve a few dry fits. The first one was to make sure the dadoes and tenons fit. The second one was to see how it looked with the bow cut out of the bottom piece and with the pre-finished panels installed. A couple of thoughts: be sure your table saw is waxed properly when cutting tenons like this. It helps if you don’t have to use force to push the piece through the saw. I realized I’m already using some of the stuff I learne...

Read this entry »


View jstewart's profile

A Beginner's Progress #6: The Finished Product

04-13-2008 12:17 AM by jstewart | 3 comments »

Based on the size, I plan to use this more as an end table than a nightstand, its original intent. I’m fairly happy with the way things came out. I’ve posted it as my first LumberJocks project. So, without further ado… I have a short series of project photos on Flickr. Here’s a link: http://www.flickr.com/photos/joshuastewart/sets/72157600298401235/

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com