LumberJocks

Woodworking blog entries tagged with 'drive'

  • Advertise with us
View Martin Sojka's profile

10 Shirts For LumberJocks Donors

01-08-2010 12:09 AM by Martin Sojka | 6 comments »

I’d like to thank all the LumberJocks donors for your financial support. It helps to keep this site free to use for everybody. It’s January 7, 2010 and as I mentioned in my LumberJocks Donation Drive 2009 post, it’s time for a random draw. Following 10 LJ donors are going to receive a cool LJ shirt: Dadoo gene Jim Bertelson cajunpen TreeBones NBeener RAH robbi LindaC Bob Babcock You can donate and support LJ anytime on our Donation page. ...

Read this entry »


View Martin Sojka's profile

LumberJocks Donation Drive 2009

12-02-2009 10:30 PM by Martin Sojka | 13 comments »

December is a time of giving, of appreciation, and of family. There is no better time to look back at the quickly passing year of 2009 and see if this website and community was a valuable source of free inspiration, motivation and knowledge for your woodworking passion. If your time here at LJ for 2009 was time well spent and you decide to support LJ financially, you can do so now by participating in the LumberJocks Donation Drive 2009. Donation funds will be used mostly: to cover ma...

Read this entry »


View Dave Rutan's profile

Dave Plays with Wood Turning #4: A Better Drive Spur for my DIY Turning Contraption

12-17-2015 08:20 PM by Dave Rutan | 1 comment »

Digging into something I began last summer, I had 3 legs to turn. The first one jumped out from between the centers about three times. I was using the drive spur I made when I first contrapted my turning set up. Before I began turning the second leg, I remembered hearing that in a drill powered set up like mine, that a spade bit could also work. I happened to have a few short shank spade bits, so I hammered one into the center of the second leg, chucked it up and gave it a try. It di...

Read this entry »


View IantheTinker's profile

Where to Buy Screws

01-27-2018 04:44 AM by IantheTinker | 7 comments »

I mostly purchase general construction screws from Menards, the Star-bit drive ones because they don’t cam out on me like the Phillips heads do. I get them there for $3.79 per one pound box, a great price for a good screw. However, they don’t carry any shorter than 1 3/4”, so I tried at Home Depot. I found some star drive screws there for $5.78 per one pound box and they had 1”, 1 1/4”, and 1 5/8” sizes, so I was quite pleased. The price was also pretty decent in my estimation. Over at Lowe’s...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com