LumberJocks

Woodworking blog entries tagged with 'drills'

  • Advertise with us
View lightweightladylefty's profile

RECALL #26: Black & Decker Recalls Hammer Drills Due to Injury Hazard

11-02-2018 04:31 AM by lightweightladylefty | 0 comments »

Black & Decker Recalls Hammer Drills Due to Injury Hazard:Recall Date: November 1, 2018Recall Number: 19-027Recall Summary Name of Product:Black & Decker, Bostitch and Porter-Cable Hammer Drills and Drill Drivers Hazard:The side handle sold with the drill can slip or break, leading to a loss of control of the tool, posing an injury hazard Remedy: ReplaceConsumers should immediately stop using the drills and contact Black & Decker for a free replacement side handle Cons...

Read this entry »


View ruddhess's profile

Southern Yellow Pine Work Surface (workbench) #6: Reinforcing my old sawhorses

03-04-2015 06:15 PM by ruddhess | 0 comments »

I’m adding some reinforcement to my old sawhorses. I want to set my workbench top on these for a while and I don’t want them to wobble or collapse. I’m just using some old 3/8” T1-11 siding that I had from a long time ago. Some small “A” frame gussets attached with drywall screws. And with what was left of the siding, some 6-5/8” wide stretchers/stringers. Line it up flush on the right, and whack the left side off. I’m using my ...

Read this entry »


View SteveW's profile

Recalled Tools #1: Ryobi recalls HP 1802M cordless

01-02-2011 03:47 AM by SteveW | 0 comments »

check this out Ryobi Recalls Cordless Drills Due to Fire Hazard After calling their customer service, and they verified I had the drill mentioned,I just received a new one…This, after almost 9 years of ownership…a new drill!

Read this entry »


View thewoodwhisperer's profile

Drill Charging Station & DowelMax

03-02-2010 07:09 PM by thewoodwhisperer | 18 comments »

During my recent shop healing session, I realized I needed a better way to store my drills and chargers. This simple wall-hanging “box” did the trick. I also wanted to make the project fast and easy, so I decided to try out the DowelMax for the first time. The system is a breeze to use and produces strong reliable joints in just a fraction of the time it takes to create a traditional mortise and tenon. Fee free to download the SketchUp Drawing for this project if you want...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com