Woodworking blog entries tagged with 'downdraft table'

  • Advertise with us
View Daris's profile

Benchtop Sander Table - Downdraft Table

09-06-2012 02:37 PM by Daris | 4 comments »

I recently completed a downdraft / sander table that I built. It was actually a pretty easy project. Here is a video of what I did to make it. You can check out more about this over at my site: Youtube Link: Here is the completed project.

Read this entry »

View Paul Stoops's profile

Decked Out Ridgid Model R4511 Table Saw #7: A Breezy Side Extension Table

12-27-2011 06:19 AM by Paul Stoops | 6 comments »

A Side Extension Table was required to fill the space between the front and rear fence support rails, outboard of the saw table. Some folks install a solid panel, as I did on my General 350 cabinet saw in my old shop because I had a multi-drawer cabinet underneath. Many folks use this space for a router table, which is a great way to add another tool to the shop without eating up any floor space. We have seen many great examples of this type of router table here on the LJ forums — it se...

Read this entry »

View ChunkyC's profile

Downdaft sanding table

11-07-2009 07:28 PM by ChunkyC | 10 comments »

Guess it’s not technically a table per se maybe a downdraft table top. My last table just so happened find it’s way to the burn pile, it was a total pos and needed to be permanently retired. The dims are roughly 36”x24”x7-1/4” and made from 1/2” BB ply, 1/4” pegboard, and 1/4” hardboard (bottom). The dust collector is connected to the table via a 3” Johnny Flange. I modified the flange by cutting some of the “flange” part...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics