LumberJocks

Woodworking blog entries tagged with 'dining room table'

  • Advertise with us
View Tooch's profile

Attaching the Legs & Playing with Milk Paint

06-29-2016 11:14 AM by Tooch | 4 comments »

Before attaching the legs, I had a lot of work to do to prep the table top for finishing. Even though it was on the underside, I still wanted to eliminate all the dried glue, so I busted out the card scraper and got to work. Before: After: That’s a lot of chips! Last thing was to cut the top to final length, which I side using a Craftsmen circular saw. Although it was really getting bogged down on the 8/4” oak, it managed to get the job done. Then I predrille...

Read this entry »


View Tooch's profile

Locking Tenon & Lumber for the top

06-02-2016 08:04 PM by Tooch | 3 comments »

So it’s been a while since I posted anything on my table, despite my continued work on it. Sometimes I find its really hard to carve out a portion of the day to do this, but I feel like its really cool to document all the work that goes into something like this. So the last entry I made showed both of the sides getting assembled, and now its time cut the long stretchers that go in between. This was a fairly physically demanding task, and the board really cantilevered over the edge of...

Read this entry »


View Patricelejeune's profile

Biedermeier/30's Dining Room Table #2: - more veneering and sanding

05-23-2014 05:53 PM by Patricelejeune | 7 comments »

So Patrick did veneer the column.He first put the veneer on an kraft paper to hold the fiber ni place, we were not sure this thick veneer will like the bending. The article can be found there http://www.oldbrownglue.com/articles.html What you see here is were the seem was made, on the overlap, using a veneer saw then using the reversibility of the glue with an iron to finish the glueing. It cleans easily enough with water I have been careful enough to mark where the ring inse...

Read this entry »


View Patricelejeune's profile

Biedermeier/30's Dining Room Table #1: - Shaping and veneering

05-05-2014 05:30 PM by Patricelejeune | 9 comments »

We have been hired to make a dining room table from a 30’s model and slide it on the Biedermeier side. This is not our usual traditional furniture making but it is also a nice change in the usual styles we work on. We started with a simple design to show the overall idea Brick laid apron in pine for a light top Poplar “plaque to glue under the top. it will host a metal plate to bolt the lower part to the top The base is made out of beech, for an heav...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com