LumberJocks

Woodworking blog entries tagged with 'delta'

  • Advertise with us
View superstretch's profile

Delta T2 36-T30 Fence on a Grizzly G1022Z Table Saw

12-28-2011 07:33 AM by superstretch | 5 comments »

INTROFor Christmas, my bro and I gave my dad the above mentioned fence as a gift. I had read in a few places that people had successfully (albeit blasphemy) mounted this fence to a G1022Z. I had my reservations, but after looking at the equivalent Shop Fox and Vega models (waaay more expensive), we decided to pull the trigger and get one from a well-respected buyer on ebay. At the same time, ebay was running a ‘fast and free’ shipping promotion. I ordered the fence on a Tuesday an...

Read this entry »


View GlennsGrandson's profile

From Rust to Lust, can I bring it back? #1: The Day I got it

02-02-2012 04:50 PM by GlennsGrandson | 4 comments »

I have already posted in forums on this topic but I had a suggestion that this may be a good idea to update my restoration status as I go. So I found this Rockwell/Delta 37-220 6” Jointer on CL the other day, asking $150, I drove 40 miles to look at it. Talked him down to $100 rather easily being it was missing the table out lock knob, the back door for the enclosed baseis also missing, as well as the beds being coated in rust, and the end of the cord has cardboard and electrical tap...

Read this entry »


View ToddinNH's profile

Replacing Start Capacitor on Delta 50-763 Dust Collector

01-11-2013 12:50 AM by ToddinNH | 0 comments »

Recently my Delta 50-763 dust collector stopped working. When I turned on the power all I’d hear was a loud humming noise but no motor revolutions. After doing some research and speaking with the folks at Delta we determined it was a bad motor starting capacitor. If you’d like to learn more about how to replace it please check out an article I wrote on my own site. http://www.homeconstructionimprovement.com/how-to-replace-start-capacitor-dust-collector-motor/

Read this entry »


View GlennsGrandson's profile

Final Entry - Achieved Bliss

06-06-2012 02:26 PM by GlennsGrandson | 3 comments »

Knives took longer than I was told to sharpen, personally I think they lost them for a while because when I called them they acted like they had no idea what I was talking about. Anyhow, I got them about 10 days ago and finally had all day yesterday to sit down with it, make sure everything was level and set all the blades. It sure felt good to see chips sliding down the shoot after several hours that I’ve put into this thing. I like it so much that I don’t even like getting it...

Read this entry »


View emrhappy's profile

The Ever Evolving Workshop #1: New Delta Unisaw with 52" Rip, Incra TS-LS and LEFT Side Router Table!

07-03-2014 03:49 AM by emrhappy | 5 comments »

I wanted to show you guys and gals my new setup. I recently purchased a Delta 36-L352 to replace MY broke down POS grizzly G0715P. I say that about the grizzly because like many others MY G0715P had a .020 deflection in the back of the blade when I raised it up or down! There was no setting that saw blade parallel with the miter slot. Grizzly wouldn’t stand behind it and said the trunions were probably broke and that I had the ‘wrong saw’ for building cabinets or anyth...

Read this entry »


View cranesgonewild's profile

Unisaw 34-450 for $300

05-27-2011 01:39 AM by cranesgonewild | 19 comments »

Yup, you read that correctly.I’ve been on a search for a while now trying to find a half decent table or cabinet saw. I’ve jumped back and forth from used on Kijiji to a new Ridgid 4512, back to used, then I was going to buy a new Grizzly G0690, right up until Monday. That’s when I got the call. My brother in law sent me a link Monday morning to a Rockwell/Delta Unisaw 34-450 on Kijiji that was posted late the night before. It was a really nice looking saw with no damage ...

Read this entry »


View GlennsGrandson's profile

From Rust to Lust, can I bring it back? #11: These bearings cost HOW MUCH?!

05-09-2012 05:22 PM by GlennsGrandson | 12 comments »

I took the bearings in to a local auto store to check on replaceing them (Bearing #:8502-k and 8503-k). They want $48 a piece for them! Wowzas. I found them online after S&H for about $63 total. I tihnk I’ll do that. But then I am getting antsy and the company told me they are a special order part so it’d probably be 3 weeks before they even ship! So my dilema is that I want to cut now, but don’t want to spend $100. So I was talking to my dad and he suggested if they wer...

Read this entry »


View pintodeluxe's profile

Laguna PX20 Planer

03-18-2021 05:01 PM by pintodeluxe | 4 comments »

Has anyone seen these new PX series planers from Laguna? They have a few size offerings from a 12-1/2” benchtop planer, all the way up to a 22” beast with electronically variable feed rate. The one that caught my eye was the PX20 because it has excellent capacity (can plane timbers up to 8” thick and panels up to 20” wide) in a relatively manageable footprint. If you’re stepping up from say a 12-13” planer, the main advantage I see with the PX20 is you...

Read this entry »


View Tyrone D's profile

Rockwell/Delta Homecraft 10" Bandsaw Restoration #1: The Beginning

03-27-2012 12:00 PM by Tyrone D | 12 comments »

Hello,I found the best find ever in my life. I found a Delta Homecraft 10” Bandsaw in an alleyway cast away near a “free” sign. I thought to myself, “That bandsaw deserves better and I took it home.There she is in her miskept beauty. On of the things that really pecks my brain is the stand. It says, “Property of CC Wakefield & Co. Ltd.” on it. Charles Cheers Wakefield is the founder of C.C.Wakefield & Co(Now known as Castrol). What’s weird is ...

Read this entry »


View withheld's profile

A workshop out of the floodplane #4: Delta Fence on the craftsman table - Where to drill the holes?

01-22-2011 09:39 PM by withheld | 2 comments »

as I mentioned in the previous post, I started working on refitting my Craftsman 10” table saw with a Delta T2 fence, based on Jaime’s blog posts. I have everything measured and marked but I’m not at all clear on how high the front rail (or the rear rail, for that matter) should go relative to the table. Jaime mentioned drilling the holes offset vertically from the manufacturer’s holes, but he just said “a bit” I didn’t see any other real indication ...

Read this entry »


« prev 1 2 3 4 5 ... 8 next »
72 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com