LumberJocks

Woodworking blog entries tagged with 'dangerous'

  • Advertise with us
View dbhost's profile

Dave Talks #2: What, no woodworking? A tour of a disasterously messy shop.

07-11-2016 03:51 AM by dbhost | 8 comments »

In today’s video I answer the viewer question from my last video. What, no woodworking? My regular readers / viewers know why, but I illustrate in it’s full ugliness a very dirty shop that is simply too hot, and too dangerous to work in. Native Texans laugh at me for not handling the heat, to which I say Guilty! What can I say? Anyway I take you for a quick spin through my shop, and show you exactly why I haven’t exactly had woodworking projects to share Mind you...

Read this entry »


View Gary Fixler's profile

random #27: New Rule: Face shield mandatory (when turning barked pieces)

09-04-2009 10:40 PM by Gary Fixler | 19 comments »

Just a quick note. I found some logs (again!) and quickly sliced up a half log for the turning. It had some loose bark I tore off, but also some seemingly strongly-affixed pieces that I decided to leave on. Too hard to remove. I was only at around 1000RPM (2nd out of about 6 speed settings on my Jet 12×20), when wHaCk! A piece of heavy, hard bark about 3”x5”, and around 3/16” thick smacked me really hard in the face. I was wearing a polycarbonate full-face shield fro...

Read this entry »


View Gary Fixler's profile

Amazing Tools #4: cedar shake saws

06-15-2009 06:56 PM by Gary Fixler | 6 comments »

This is without a doubt the scariest looking sawyer job I’ve seen yet. Check out how casually he thrusts his unsupervised hand at the 4’+ tall circular saw blade! There are many more videos of people in this job with these saws on YouTube. Scary stuff.

Read this entry »


View Tom Adamski's profile

DANGER! Chinese Plywood

04-03-2008 10:56 PM by Tom Adamski | 46 comments »

Yes it’s cheap, and most of the time it will warp as soon as it is removed from the stack, but it can also be dangerous. Acording to an employee at Owl Hardwood in Lombard, IL, there is an instance where metal was found between the plys. The consumer that bought it found what appeared to be a utility knife blade while he was ripping the sheet on a table saw and in doing so, destroyed his blade. No coments if the person was injured, but I would not want to be around when pieces of ca...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com