LumberJocks

Woodworking blog entries tagged with 'cutting board'

  • Advertise with us
View jadams's profile

Inversions cutting board tutorial

09-15-2011 03:50 PM by jadams | 11 comments »

In response to some questions about how this pattern is made… I’m not sure if this is the only method, but here’s how I did it. Here’s the original project I posted: http://lumberjocks.com/projects/53452 Hint: When you look at the board, long ways going left to right, every row is a different size, but every group of 2 rows are all the same size! Solution: First you rip strips like you would for a regular end grain board, but in a progression of widths from l...

Read this entry »


View Porosky's profile

Drunken Cutting Boards #2: Smooth Flowing Drunken Checker board

09-21-2009 03:49 AM by Porosky | 15 comments »

So having read part #1 I’ll complete the second variation of the Drunken checker board pattern. The process is basically the same except for one critical part and is as follows. Start again by taping two blanks together. This time In stead of making opposing S cuts I’ll follow the S pattern with each cut. (I get a little sloppy, but it works out OK). Follow the Part #1 procedure. CRITICAL PART! This step creates the difference between the pattern in part one ...

Read this entry »


View Mary Anne's profile

How to make a Wild 'n' Crazy two-tone board

09-27-2010 10:09 PM by Mary Anne | 33 comments »

Sometimes the finished project looks harder to make than it really is. By request, here is a quick tutorial on making a two-tone pattern board. All you need is a bandsaw… or maybe a scroll saw. Start with two boards of contrasting woods squared and surfaced on all sides. ——Use double-sided tape to align and stack them. (carpet tape works great) ——- Cut random curvy lines through both pieces on the bandsaw. This was my first test of the Carter S...

Read this entry »


View Scott Bryan's profile

CS1 End Grain Cutting Board

09-30-2010 02:49 AM by Scott Bryan | 14 comments »

Well I finally decided to join the cutting board club and this project completes my membership requirements. Now I am waiting for one of you charter members to send me the secret handshake. :) I needed to come up with something for my wife since her birthday is coming up this weekend. It basically boiled down to building her something or taking her shopping for clothes. To tell the honest truth I would much rather be spending time in the shop rather than sitting in a chair while she sp...

Read this entry »


View Brad_Nailor's profile

Checkerboard End Grain Cutting Board #1: Skecthup Model....ya, you heard me right...of a cutting board

05-29-2009 05:11 AM by Brad_Nailor | 9 comments »

I know what your thinking…this lunatic made a Sketchup model of a cutting board? Can’t he just wing it? Ya sure, I have made quite a few cutting boards with and without plans. The few I have done plans for were in Autodcad, to work out the design details, but this is the first time I have used SU for planning a cutting board. I wanted to be able to know exactly how much material I was going to need, and how it was going to have to be glued up so it would come out exactly as I want...

Read this entry »


View GaryK's profile

How I made my Intersected cutting board

02-18-2011 08:54 AM by GaryK | 35 comments »

Here is how I made my Intersected cutting board posted here. There seems to be a lot of interest in this board so here is a blog on how I made it. First of all here’s what I planned on making. It’s the top one. After I got both the circles intersected I liked how it looked with the rounded corners so I just added in the “wedge shapes”at the top and bottom and called it done. I think that it makes it very distinctive also. As one person guessed I ...

Read this entry »


View Jeremy Greiner's profile

Cutting Board Design Software Demo Video

10-22-2011 09:27 PM by Jeremy Greiner | 26 comments »

The cutting board designer is mostly finished now and I wanted to post a demo video and a link to the application which anyone can download and use for 7 days. I have sent temporary licenses to some people who volunteered for some beta testing. I have a few more licenses to give out if anyone is interested in some beta testing. If you’d like to give it a try the installer can be downloaded from: http://www.1024studios.com/CuttingBoardDesigner_Setup.exe Here’s the Video What wo...

Read this entry »


View Ampeater's profile

Using a router to make the "Lazy Larry" #1: Making the "Lazy Larry" using a router and router jig.

06-19-2009 02:14 AM by Ampeater | 9 comments »

Degoose showed us how to make the jig that uses a bandsaw to make the spiral sections of his “Lazy Larry”. Well I made the jig, but my old small bandsaw just wasn’t up to the task. I wasn’t about to quit, so I decided to try to make a jig that I could use with my router. It took me awhile to figure it out (using Sketchup), but once I did, it was rather easy to make the jig. Here is how to make the jig. Picture 1. 1. Cut a 3/4” thick piece of MDF ...

Read this entry »


View sam20650's profile

Random End Grain Block Tutorial

06-13-2011 07:30 PM by sam20650 | 17 comments »

I had some requests on a tutorial of how I put together the end grain butcher block top for the island Jay and I recently built (Once the base gets the final coat of paint to match the kitchen cabinets one of us will post that as a project but here are a few pictures of it almost done) I took a couple of in process pictures while I was making the top but not as many as I might of had I known I would be writing a lesson on it. So if I miss anything or seem to skip any steps let me k...

Read this entry »


View Gary Fixler's profile

006: pallet wood cutting board #1: visualizing a cutting board in SketchUp

03-29-2010 01:03 PM by Gary Fixler | 6 comments »

I got some good suggestions in my last post about what to do with this block that I glued up from mostly reclaimed red oak pallet wood: One of the ideas I liked best was an end grain cutting board. I realized I had pics of each side of the block, so I made a block in SketchUp of the same dimensions, then slapped on textures from those pictures. It looked like this: Now I could cut that up by drawing lines at the locations where I wanted the cuts, then using the push/pull tool t...

Read this entry »


« prev 1 2 3 4 5 ... 10 next »
97 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com