LumberJocks

Woodworking blog entries tagged with 'cutting board'

  • Advertise with us
View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

08-18-2010 03:03 AM by SPalm | 90 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »


View Porosky's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by Porosky | 54 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View SPalm's profile

Another Cutting Board Design

07-12-2010 05:00 PM by SPalm | 27 comments »

I am in the process of building another board and thought I would share my thinking process along with some build pictures. When I came up with the design for the Steps board, I was thinking about how one draws a 3D box on a piece of paper. You draw a large square, and then add small mitered edges to one corner to give the appearance of seeing it slightly from the side. Making these miters out of two different woods adds to the shadows, which adds to the effect. I did this for the Steps b...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 68 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View jfk4032's profile

Tumbling block cutting board techniques, lessons learned and tips for cutting and assembly

01-13-2014 02:32 PM by jfk4032 | 13 comments »

After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...

Read this entry »


View SPalm's profile

Staggered Steps Endgrain Cutting Board

06-27-2010 03:56 AM by SPalm | 45 comments »

This is a new style of cutting board (at least new to me). I was thinking about 3D designs on the way home from work last week, after Martyn’s Blog and Steve’s Video. So I came up with this. Kind of Sinister, kind of Tumbling block. Once I drew it out, it reminded me of Staggered Stairs (which are kind of cool), and reminded Karen of the Steps on the Row Houses in Baltimore. So that is how the name came about. I started with 6/4 walnut cut into 10 inch strips. This small length makes ...

Read this entry »


View ganders's profile

The quick and dirty instructions on how to make a zig-zag pattern cutting board.

08-06-2008 12:26 PM by ganders | 26 comments »

The quick and dirty instructions on how to make a zig-zag pattern cutting board. Click on the pictures to see a full size image. Choose a couple different types of hardwood. The more colors the better. Below is cherry, maple and walnut. Rip strips of wood any width so the total with is about 12”. This is the width that will fit through my planer. The beauty of this is that none of the widths have to be the same. The board shown below is made of scrape wood. If you only have shor...

Read this entry »


View Tony's profile

Lattice Cutting board Help

09-11-2007 03:45 PM by Tony | 31 comments »

Update: 7 september 2010. As I do not have a lot of spare time for woodworking at the moment, I am submitting this blog for the contest, I hope you guys don’t mind that it is a little old Here is a link to the final projects- http://lumberjocks.com/projects/2542http://lumberjocks.com/projects/2559 http://lumberjocks.com/assets/pictures/projects/9436-438x.jpg?1233630507 After several e-mails requesting the plans for the Dan Walters cutting board I copied I decided to put some...

Read this entry »


View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 41 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #2: Zig Zag Cutting Board Patterns - Inspirational

10-05-2010 09:19 PM by McLeanVA | 28 comments »

I was absolutely overwhelmed by the positive response to my Zig Zag How To blog post yesterday, that I decided to brainstorm some possible combinations (on my lunch break) using the basic steps I outlined yesterday. All of the same techniques and steps apply, and really the only difference is the woods and measurements that make up the original “sticks.” Same rules apply to width = height. Length is up to you. Please experiment with whatever measurements and combinations strike...

Read this entry »


1 2 3 4 ... 10 next »
97 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com