LumberJocks

Woodworking blog entries tagged with 'coffee table build-off'

  • Advertise with us
View Nitreug's profile

Alex's Coffee Table Build Off #4: The finishing line!

11-17-2014 12:05 AM by Nitreug | 2 comments »

In my last entry, I finished by attaching the top as you can see in this picture: Before I attached the top, I roughly cut the end of the leg to size so I then had to blend the top and legs into one table. I used my spokeshave to create round-over where the route couldn’t reach. I used chisels to cut the bulk of the tenon and I then used rasps to blend everything together. Finally, I had to sand the entire table. Thankfully, I had access to a pneumatic sander which is ...

Read this entry »


View Nitreug's profile

Alex's Coffee Table Build Off #3: The top

11-16-2014 02:46 AM by Nitreug | 0 comments »

In this entry, I’ll cover some design and the construction process for the top. This blog series is not in chronological order but for the ease of reading, I’ll cover all of the top in a single entry as opposed to covering it in a few separate entries. As I wrote in my first entry, I decided to make the top more stable without making the top too thick. I call this “the spine”. The center section of my top is made from 8/4 maple and I decided to put a half-cove on ea...

Read this entry »


View Nitreug's profile

Alex's Coffee Table Build Off #2: The complete base

11-12-2014 01:33 AM by Nitreug | 0 comments »

In my last post, I covered the rationale for my design and how I made several cuts mostly on the bandsaw to make one base. I will now discuss in greater detail how I built the rest of the base including the legs and stretcher and how I did the glue up. I left off with this base: Although I made a very similar drawing on my second base none of the line remained after I made a few cuts on the bandsaw. Since I deviated a little bit from the plan, I decided to use the actual first base to c...

Read this entry »


View Nitreug's profile

Alex's Coffee Table Build Off #1: Design and base

11-10-2014 12:24 AM by Nitreug | 0 comments »

A few weeks ago, I decided to join the Coffee Table Build Off started by Neil Cronk. You can read more about his initiative here: http://www.cronkwrightwoodshop.com/coffee-table-build-off/ From the start, I wanted to design something incredibly challenging (at least challenging in the 21 days allowed for the build off). I knew from the start that I wanted my table to look “organic” with not many straight lines. Curvy might be a word to describe what I was aiming for. A bent laminated base ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com