Woodworking blog entries tagged with 'cedar gate'

  • Advertise with us
View Benchworx's profile

Routing, Glue-up & Details

09-05-2016 09:24 PM by Benchworx | 0 comments »

So now that I have the rough lumber down to final dimensions, I marked out the middle of each piece, both vertical and horizontal and then marked 7mm on each side for a 14mm wide dado. The depth was approx 6mm as well, which I had to consider when cutting the horizontal slats. The slats themselves I wanted free floating, as I didn’t want to domino all the slats into one piece, but could have. I did a quick dry fit to ensure there were no problems (other than my camera skills)..... ...

Read this entry »

View Benchworx's profile

Cedar Gate Build #2: Glue up and Final Dimensioning

09-04-2016 09:22 PM by Benchworx | 0 comments »

Once I had the lumber roughly the dimensions I wanted as well as having one face and the edges jointed, it was time to get gluing! I pulled out the domino and started joining the two jointed faces on each board with dominos and glue. This was followed by A LOT of clamping, although not as much as some have done for their projects. Clamping cauls were used on some parts while pine spacers were used on others simply to avoid marks or indentations on the cedar itself. The main comp...

Read this entry »

View Benchworx's profile

Cedar Gate Build #1: Rough Dimensions for a Cedar Gate

09-04-2016 06:57 PM by Benchworx | 0 comments »

I promised my better half that I’d complete the outdoor projects this summer and so far, haven’t been able to hold true to my word due to a wet and unpredictable summer. I did want to get a healthy start on the projects though and started by planning a simple gate for our seldom used side of the house. Simple but appealing is what I was looking for, so I started with rough dimensions for the gate. As I had some new & stained cedar, some old, weathered cedar and scraps to ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics