LumberJocks

Woodworking blog entries tagged with 'carving knife'

  • Advertise with us
View ShaunMeighan's profile

A super easy carving knife!

06-06-2017 08:11 PM by ShaunMeighan | 6 comments »

Hi folks! This weekend I made a simple carving knife out of an old jigsaw blade! Check it out. View on YouTube

Read this entry »


View mafe's profile

Carving tools #6: Carving knifes from old plane iron - spoon knife from jig saw blade

02-21-2016 09:05 PM by mafe | 17 comments »

Carving knifes from old plane ironspoon knife from jig saw blade With a soft spot for tool making and beauty, I decided it was time to make my own carving knifes, found a wonderful old Chinese hand forged plane iron in a drawer of junk in my workshop and decided to give it a go. This is what we will end up with, two carving knifes and a long blade spoon knife.(This sketch was made after they had come to life). Started up with no real plan, just that I wanted two blades, one flat and ...

Read this entry »


View helluvawreck's profile

Carved Three Carvings Saturday and Sunday

07-18-2011 05:17 PM by helluvawreck | 19 comments »

I’ve been trying to learn chip carving for about 3 months. I like to carve free form chip carvings. I’ve still not gotten to the point where I’m satisfied with my chip carvings but I can do it better than what I could three months ago. I also try to do relief carvings occasionally but I haven’t done very many. Anyways, for the first time in a good while I decided that I wanted to do a relief carving so I chose this simple flower since I’m a beginner. IR...

Read this entry »


View PaBull's profile

Carving a carving knife #1: First attempt to make a carving knife

10-22-2010 04:38 PM by PaBull | 11 comments »

My second oldest daughter needs a birthday gift and I have only days to complete it. Don’t you love those last minute projects? She is into carving, but only has the carving set with the “end blades”. So why not build a carving knife. So last knight I started with a block of pallet wood, a rod of 3/16 brass and a sawzall blade.The shape I was going for is shown here: I took a sawzall blade and cut it in half with a sheet metal cutter. (this stuff is hard to cut) After ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com