LumberJocks

Woodworking blog entries tagged with 'captains'

  • Advertise with us
View RobII's profile

Four-Poster Captain's Bed #1: Introduction to where I am & what I'm doing

09-15-2015 07:41 PM by RobII | 0 comments »

Just got engaged a few months ago and promised my bride-to-be a hand-made captain’s bed (you know, drawers underneath the mattress platform) with corner posts and a canopy with a mirror. Found out they don’t use glass, but it’s still reflective – so it’s OK. Thought I’d start with turned posts and mixed species to give the bed some “character” instead of the much more common square or built-up posts and all the same wood – bleah! Got ...

Read this entry »


View pintodeluxe's profile

Mission Dining Build #5 - Armrest Fitment

10-11-2011 01:21 AM by pintodeluxe | 3 comments »

Here are the steps I use to fit an armrest to the armchairs. As usual start with a mortise. Use a sanding stick that is nearly as wide as the mortise. Attach 100 grit sandpaper to only one side of the sanding stick. Use the sanding stick at a slight angle to clean up the mortise. The angle in the picture is exaggerated for clarity. A slight angle will prevent damage to the exposed side of the mortise, as well as make assembly easier. Fit the tenon as you go until you have a nice sn...

Read this entry »


View gbarteck's profile

Twin-Sized Bed With Pull-Out Desk, Closet, and Dresser #4: The desk unit

01-28-2010 05:53 AM by gbarteck | 3 comments »

While all of the subassemblies of the second bed are the same as the first, I needed to build the desk unit and dresser units as “mirror images” of how they were built on the first bed, due to how the bed would be situated in the bedroom. Since the dresser unit is at the “head” end of the bed, and the desk must be oriented so that the chair goes on the same side of the desktop as the dresser (a change from the first bed design… see entry #2 in this series), th...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com