Woodworking blog entries tagged with 'c10fl'

  • Advertise with us
View technoslick's profile

Woodworking on a Half-Shoestring #64: Workshop Update: Knocking the C10FL down a notch

04-06-2016 02:13 PM by technoslick | 1 comment »

The Hitachi C10FL I bought off a widow last year has to be one of the best shop investments I have made. It needed a little work, mostly tuning up. Replacing the worn out v-belt with a HF link belt made this smooth running and relatively quiet. I’ve had it long enough to develop a short list of undesirables for this model. Some of the items on my complaint list are well known design shortcomings. Some are just what bothers me for their respective reasons, like the width of the aluminum ...

Read this entry »

View technoslick's profile

Woodworking on a Half-Shoestring #57: HF Accu-Link V-Belt on Hitachi C10FL -- Wow!!

08-30-2015 03:50 PM by technoslick | 6 comments »

Previously I blogged about the very noticeable vibration and wobbling noise when the recently acquired 2009 Hitachi C10FL table saw was operated. Fellow LJ COGoose recommended buy the Harbor Freight Accu-Link V-Belt to solve the problem. The wife and I were going to be in the Triple-Cities area where a Harbor Freight is located, so a stop was made to pick one up. The Accu-Link A-Link-5 belt comes in a 24” length. I needed about 9”, this left lots for future replacements. Here i...

Read this entry »

View technoslick's profile

Woodworking on a Half-Shoestring #53: Hitachi C10FL Acquisition - Part 2

08-20-2015 11:30 AM by technoslick | 2 comments »

A week has gone by since my previous post. In that time I have made some progress. Several days ago I figured out a way to get it into the dungeon. A couple of days ago I added back the steel base stand, moved the retractable casters to their correct location on the legs—the previous owner really didn’t know what he was doing in assembling and running this saw—and managed to gently tip it off the hydraulic table and onto its side, then lift it onto its legs…all by myse...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics