LumberJocks

Woodworking blog entries tagged with 'benchhook'

  • Advertise with us
View HappyHowie's profile

Bench Top

01-03-2016 03:56 AM by HappyHowie | 2 comments »

I have been giving some thought to replacing the bench top on my small workbench. I have been formulating the lumber I will use. i will continue to use construction grade Douglas Fir, but I will not use 2 by 4s like I did when I built it from a Woodsmith plan. I deviated from the plan by making the benchtop longer and placing a vise on the front left side. Instead of 2 by 4s I will use either 2 by 8s or 2 by 10s and rip them to about 3 inches or as wide as I can get them after milling th...

Read this entry »


View Mike Lingenfelter's profile

Small Workbench #4: The Top

12-30-2007 11:48 PM by Mike Lingenfelter | 9 comments »

For the top I wanted something that could stand up to getting wet. I thought I would use a laminate countertop (Formica). At our Home Depot you can get small 2’ x 4’ pieces of laminate. The selection isn’t that large, but I think I found something that worked for me. I glued and screwed to pieces of ¾” plywood together. Then I used some scrap pieces of oak to trim off the edges. I then applied some contact adhesive to the top and the laminate and put them together. I put small ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com